Slow Jamming Tuesday but still beats Two-Turd-Tuesday! Good morning LSU.God morning Native.
Slow Jamming Tuesday but still beats Two-Turd-Tuesday! Good morning LSU.The old closet should be cleaned out soon, repeat jams for 4 or 5 months now.
Unfortunately probably correct and winter is when we need good jams for entertainment and to stock up for spring and summer.Slow Jamming Tuesday but still beats Two-Turd-Tuesday! Good morning LSU.The old closet should be cleaned out soon, repeat jams for 4 or 5 months now.
Weather has been nice here for several days but back up to 93 today and 75 now.Not as warm here this week but warmer than the last 5 days, still nice out though.
Nice $3.50 Smoke you don't see on special too often. Sancho Panza Double Maduro (5.25x 54) @ The Sister 10/$35 FS today. Sometimes found a little cheaper but not real often.I tried a SP when I first started smoking years ago, worst cigar I have still had to date and they scared me off from trying again. It's never good to have your first cigar of a good line end up being crap.
Little warm yesterday but last 5 days here have been about perfect. Looks like today is the only hot day then moderating some for the rest of the week, I don't like it being so hot when I go to work around 5 a.m.Weather has been nice here for several days but back up to 93 today and 75 now.Not as warm here this week but warmer than the last 5 days, still nice out though.
6 Drew Estate My Uzi Weighs a TonAnother new item from great old CI!
5/25.00
5 Punch Uppercut Toro
10/32.50
4 5 Vegas Limitada TENTH Belicoso
5/29.50
3 Oliva Master Blends III Robusto
10/39.99
2 La Gloria Cubana Serie R Black No 58 Gordo
5/22.50 1 CLE Cuarenta
10/29.50
That can sure happen and make you not wish to go back, there are several like that for me, EPC would be the best example! I have found SP's to usually smoke like a more expensive cigar and enjoy them.Nice $3.50 Smoke you don't see on special too often. Sancho Panza Double Maduro (5.25x 54) @ The Sister 10/$35 FS today. Sometimes found a little cheaper but not real often.I tried a SP when I first started smoking years ago, worst cigar I have still had to date and they scared me off from trying again. It's never good to have your first cigar of a good line end up being crap.
Good morning Dave and Chip, Happy Fuckin' Tuesday!Good morning Scott.
Time to go to the coal mine before traffic hell begins. BBLHave a great day.
Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Morning Gents! :D
Well Good Morning CG Yellowstar great to see you wake up with the Gents attitude this Tuesday morning!Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Morning Gents! :D
Haha...it's a good day so far, minus this whole 'work' thing.Well Good Morning CG Yellowstar great to see you wake up with the Gents attitude this Tuesday morning!Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Morning Gents! :D
We are all having to deal with that except Florida Dean! (I would rather deal with my office than BabySit so I don't envy Bad Dad as being "retired".Haha...it's a good day so far, minus this whole 'work' thing.Well Good Morning CG Yellowstar great to see you wake up with the Gents attitude this Tuesday morning!Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Morning Gents! :D
Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
yeah, BD works harder than most of us chasing the grandkids around. I get tired reading his stories.We are all having to deal with that except Florida Dean! (I would rather deal with my office than BabySit so I don't envy Bad Dad as being "retired".Haha...it's a good day so far, minus this whole 'work' thing.Well Good Morning CG Yellowstar great to see you wake up with the Gents attitude this Tuesday morning!Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Morning Gents! :D
Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
More on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
Fair pointMore on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
Good morning Scott and NJDave!Fair pointMore on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Morning Chip, Dave, Dave, Dean, littlefish, four star. Good Tuesday to ya.It's a fine Tuesday!
Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Nice summer morning in TX when it should be a nice fall morning! But I have been deer hunting in November and seen the thermomter sitting in the 100's. Fall comes in short little blasts of 2 or 3 days at a time here. And speaking of hunting did you go bird hunting as planned?Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
I have options, just trying to decide on which one I like best :) No need to rush it, the cigars are currently safe.Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
No, :( My dad is traveling this week for work and had to take care of a bunch of stuff before he left town on Sunday. Mildly annoyed, but I needed the rest too after a long weekend of humidor building and homework to boot. It's happening this weekend, just unsure of when.Nice summer morning in TX when it should be a nice fall morning! But I have been deer hunting in November and seen the thermomter sitting in the 100's. Fall comes in short little blasts of 2 or 3 days at a time here. And speaking of hunting did you go bird hunting as planned?Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Warm up a little for you Dean?another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Maybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Chit happens! Hope it works out better for you this weekend!No, :( My dad is traveling this week for work and had to take care of a bunch of stuff before he left town on Sunday. Mildly annoyed, but I needed the rest too after a long weekend of humidor building and homework to boot. It's happening this weekend, just unsure of when.Nice summer morning in TX when it should be a nice fall morning! But I have been deer hunting in November and seen the thermomter sitting in the 100's. Fall comes in short little blasts of 2 or 3 days at a time here. And speaking of hunting did you go bird hunting as planned?Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Morning Coffin-Boy!Good morning Scott and NJDave!Fair pointMore on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
yep. got down to the low 70's overnight, getting back into the upper 80's today. love that kind of weather.Warm up a little for you Dean?another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Howdy Scotty...what's up today!Morning Coffin-Boy!Good morning Scott and NJDave!Fair pointMore on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
Hump is coming up from Iowa and a buddy of his from VT to hunt with Marker(Jamie) and I this weekend...should be a blast(literally!)Chit happens! Hope it works out better for you this weekend!No, :( My dad is traveling this week for work and had to take care of a bunch of stuff before he left town on Sunday. Mildly annoyed, but I needed the rest too after a long weekend of humidor building and homework to boot. It's happening this weekend, just unsure of when.Nice summer morning in TX when it should be a nice fall morning! But I have been deer hunting in November and seen the thermomter sitting in the 100's. Fall comes in short little blasts of 2 or 3 days at a time here. And speaking of hunting did you go bird hunting as planned?Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
this is for Traveling Dave.All too true Dean.... unfortunately can add many more.
http://www.cnn.com/2014/10/06/travel/annoying-airport-behavior/index.html
Maybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
Dang a long trip from Vermont to ND!Hump is coming up from Iowa and a buddy of his from VT to hunt with Marker(Jamie) and I this weekend...should be a blast(literally!)Chit happens! Hope it works out better for you this weekend!No, :( My dad is traveling this week for work and had to take care of a bunch of stuff before he left town on Sunday. Mildly annoyed, but I needed the rest too after a long weekend of humidor building and homework to boot. It's happening this weekend, just unsure of when.Nice summer morning in TX when it should be a nice fall morning! But I have been deer hunting in November and seen the thermomter sitting in the 100's. Fall comes in short little blasts of 2 or 3 days at a time here. And speaking of hunting did you go bird hunting as planned?Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Yeah, he is coming down for a week with his dad to blast the ringnecks in ND and some waterfowl in MNDang a long trip from Vermont to ND!Hump is coming up from Iowa and a buddy of his from VT to hunt with Marker(Jamie) and I this weekend...should be a blast(literally!)Chit happens! Hope it works out better for you this weekend!No, :( My dad is traveling this week for work and had to take care of a bunch of stuff before he left town on Sunday. Mildly annoyed, but I needed the rest too after a long weekend of humidor building and homework to boot. It's happening this weekend, just unsure of when.Nice summer morning in TX when it should be a nice fall morning! But I have been deer hunting in November and seen the thermomter sitting in the 100's. Fall comes in short little blasts of 2 or 3 days at a time here. And speaking of hunting did you go bird hunting as planned?Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
That said a week of blasting pheasants and ducks is well worth the trip.Yeah, he is coming down for a week with his dad to blast the ringnecks in ND and some waterfowl in MNDang a long trip from Vermont to ND!Hump is coming up from Iowa and a buddy of his from VT to hunt with Marker(Jamie) and I this weekend...should be a blast(literally!)Chit happens! Hope it works out better for you this weekend!No, :( My dad is traveling this week for work and had to take care of a bunch of stuff before he left town on Sunday. Mildly annoyed, but I needed the rest too after a long weekend of humidor building and homework to boot. It's happening this weekend, just unsure of when.Nice summer morning in TX when it should be a nice fall morning! But I have been deer hunting in November and seen the thermomter sitting in the 100's. Fall comes in short little blasts of 2 or 3 days at a time here. And speaking of hunting did you go bird hunting as planned?Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
Freakin' safety training, dammitHowdy Scotty...what's up today!Morning Coffin-Boy!Good morning Scott and NJDave!Fair pointMore on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
You got to Man-Up and do it, it is for your own good!!!!Freakin' safety training, dammitHowdy Scotty...what's up today!Morning Coffin-Boy!Good morning Scott and NJDave!Fair pointMore on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
Ouch, don't get caught being unsafe! Always use protection!Freakin' safety training, dammitHowdy Scotty...what's up today!Morning Coffin-Boy!Good morning Scott and NJDave!Fair pointMore on-line safety training for me today, should put me in a Tuesday kind of moodWhen are you not in a Tuesday kind of mood?
I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
Thanks for the recaps, Chip. Mucho workaference and the recaps help a lot.Agreed...sick employee makes GoldStar a busy man!
You need 180deg for the shelves to clear?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
180 for them to pull out, the door and side frame(side to side)...essentially opening to a true 90deg angle. SOme open to a 90deg, but they dont pull the door back far enough. I think I found a couple that might work out from the european style.You need 180deg for the shelves to clear?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
http://www.richelieu.com/us/en/category/hinges-slides-and-opening-systems/hinges-and-accessories/hinges/blum-hinges/clip-top-blumotion-clip-top/clip-top-hinge-zero-protrusion/1047318180 for them to pull out, the door and side frame(side to side)...essentially opening to a true 90deg angle. SOme open to a 90deg, but they dont pull the door back far enough. I think I found a couple that might work out from the european style.You need 180deg for the shelves to clear?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
Did we just become best friends?http://www.richelieu.com/us/en/category/hinges-slides-and-opening-systems/hinges-and-accessories/hinges/blum-hinges/clip-top-blumotion-clip-top/clip-top-hinge-zero-protrusion/1047318180 for them to pull out, the door and side frame(side to side)...essentially opening to a true 90deg angle. SOme open to a 90deg, but they dont pull the door back far enough. I think I found a couple that might work out from the european style.You need 180deg for the shelves to clear?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
YES!Did we just become best friends?http://www.richelieu.com/us/en/category/hinges-slides-and-opening-systems/hinges-and-accessories/hinges/blum-hinges/clip-top-blumotion-clip-top/clip-top-hinge-zero-protrusion/1047318180 for them to pull out, the door and side frame(side to side)...essentially opening to a true 90deg angle. SOme open to a 90deg, but they dont pull the door back far enough. I think I found a couple that might work out from the european style.You need 180deg for the shelves to clear?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
I always thought some of you guys were a little unhinged. Hello again boys.It appears so flip, some 5 packs of coronas left at the sis but the rest show "sold out"
quick question. did they stop making 5 Vegas high primings? I have a friend who really likes those cigars...
So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Gonna be a little scarce myself today....I'm on stage for the next three days.Just imagine everyone in their underwear!
Thanks, there was nothing on the devil either.I always thought some of you guys were a little unhinged. Hello again boys.It appears so flip, some 5 packs of coronas left at the sis but the rest show "sold out"
quick question. did they stop making 5 Vegas high primings? I have a friend who really likes those cigars...
If he's "on stage" is he in his underwear?Gonna be a little scarce myself today....I'm on stage for the next three days.Just imagine everyone in their underwear!
I thought i was past the one star, how come no pumpkins :-[There was a reassessment. Taxes are going up.
I'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
What are you using to seal it? Have you started seasoning?Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
No seasoning yet - all depends on how the hinge seals will depend on my seal. I might not have to do anything, but I might use a thin weather stripping(still undecided since I am just finalizing my hinges)What are you using to seal it? Have you started seasoning?Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Rookies! Amiright Shaun? I mean Best Friend!Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Well hurry the fuck up, already!No seasoning yet - all depends on how the hinge seals will depend on my seal. I might not have to do anything, but I might use a thin weather stripping(still undecided since I am just finalizing my hinges)What are you using to seal it? Have you started seasoning?Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Morning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe. Hey man they started having Sculpin in 6-paks at my local store! Expensive beer for a redneck but it sure is good and the Warden likes it too.
Morning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Nice coupon at Famous - $40 off $150, charge $5.99 for shipping though
Pick up some Long Trail Limbo IPA if you get a chance, very goodMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe. Hey man they started having Sculpin in 6-paks at my local store! Expensive beer for a redneck but it sure is good and the Warden likes it too.
Will see if they have it. Amazing this is such a craft beer drinking city with two huge beverage store operations and a large grocery store beer operation or two and craft beer is a hit or miss item.Pick up some Long Trail Limbo IPA if you get a chance, very goodMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe. Hey man they started having Sculpin in 6-paks at my local store! Expensive beer for a redneck but it sure is good and the Warden likes it too.
What is this, Amateur Hour! ;)Rookies! Amiright Shaun? I mean Best Friend!Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Morning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Mornin Joe!
Morning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Hey, CG. What was the $ on that last box of LAdC #1's you recently picked up?$88 plus shipping for the EEs
Hey, CG. What was the $ on that last box of LAdC #1's you recently picked up?$88 plus shipping for the EEs
That's not a bad price...anything under $100 is like robbery IMO.Hey, CG. What was the $ on that last box of LAdC #1's you recently picked up?$88 plus shipping for the EEs
Great deal there. I thought I remembered as much. The Famous deal gets them for 112 shipped. Just debating on how to spend that cpn.
Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
That was sure the case here on the Sculpin. 22 oz bottles were $9/each and 6 paks were $14 each.Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
That was sure the case here on the Sculpin. 22 oz bottles were $9/each and 6 paks were $14 each.Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
Simply stated with the Sculpin here it is 44 oz/$18 or 72 oz/$14 so a huge difference. Probably my imagination but I thought the beer out of the 22oz bottle tasted better than that from the 12 oz.Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
Yeah, it's basically like buy two get one free 22oz bottles... except the bottle would be 24oz (since 2x 12oz bottles in the six pack)... so it's a decent savings. I just got the one 22oz bottle of it but I'll switch to the six packs going forward.
Simply stated with the Sculpin here it is 44 oz/$18 or 72 oz/$14 so a huge difference. Probably my imagination but I thought the beer out of the 22oz bottle tasted better than that from the 12 oz.Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
Yeah, it's basically like buy two get one free 22oz bottles... except the bottle would be 24oz (since 2x 12oz bottles in the six pack)... so it's a decent savings. I just got the one 22oz bottle of it but I'll switch to the six packs going forward.
Actually the same case with the Sculpin, I thought the 22 oz bottle tasted closer to that I had on tap a couple of weeks ago.Simply stated with the Sculpin here it is 44 oz/$18 or 72 oz/$14 so a huge difference. Probably my imagination but I thought the beer out of the 22oz bottle tasted better than that from the 12 oz.Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
Yeah, it's basically like buy two get one free 22oz bottles... except the bottle would be 24oz (since 2x 12oz bottles in the six pack)... so it's a decent savings. I just got the one 22oz bottle of it but I'll switch to the six packs going forward.
Couldn't tell ya the science behind that one other than guessing that they're all from relatively small batches each time they brew it, so maybe there was some variation? I had a Mother Earth SinTax out of the bottle the other day, too, and it was more robust than any other time I've had it out of a bottle, and tasted closer to how it's been on tap out here.
Actually the same case with the Sculpin, I thought the 22 oz bottle tasted closer to that I had on tap a couple of weeks ago.Simply stated with the Sculpin here it is 44 oz/$18 or 72 oz/$14 so a huge difference. Probably my imagination but I thought the beer out of the 22oz bottle tasted better than that from the 12 oz.Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
Yeah, it's basically like buy two get one free 22oz bottles... except the bottle would be 24oz (since 2x 12oz bottles in the six pack)... so it's a decent savings. I just got the one 22oz bottle of it but I'll switch to the six packs going forward.
Couldn't tell ya the science behind that one other than guessing that they're all from relatively small batches each time they brew it, so maybe there was some variation? I had a Mother Earth SinTax out of the bottle the other day, too, and it was more robust than any other time I've had it out of a bottle, and tasted closer to how it's been on tap out here.
No one here I would look at that as a positive...and Mormon underwear at that!Gonna be a little scarce myself today....I'm on stage for the next three days.Just imagine everyone in their underwear!
Yea, it's not like you're building a website or something hard...Well hurry the fuck up, already!No seasoning yet - all depends on how the hinge seals will depend on my seal. I might not have to do anything, but I might use a thin weather stripping(still undecided since I am just finalizing my hinges)What are you using to seal it? Have you started seasoning?Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Have to watch the dates on all of them around here as fresher is better with every beer that i know of. Even Budweiser!Actually the same case with the Sculpin, I thought the 22 oz bottle tasted closer to that I had on tap a couple of weeks ago.Simply stated with the Sculpin here it is 44 oz/$18 or 72 oz/$14 so a huge difference. Probably my imagination but I thought the beer out of the 22oz bottle tasted better than that from the 12 oz.Good to hear though I expected nothing less. If you do the math on the 6-pack cost vs 22oz bottle it's actually a good dealMorning, all. Got a ridiculous pile of crap to get through at the 'old' office this morning... sheesh. I've over this gig.Morning Joe, so you'll be around for longer than an hour?
Who knows. I leave as soon as I possibly can! No offense. Morning, Scott. Had the new release Victory at Sea the other day, still great stuff.
Yeah, it's basically like buy two get one free 22oz bottles... except the bottle would be 24oz (since 2x 12oz bottles in the six pack)... so it's a decent savings. I just got the one 22oz bottle of it but I'll switch to the six packs going forward.
Couldn't tell ya the science behind that one other than guessing that they're all from relatively small batches each time they brew it, so maybe there was some variation? I had a Mother Earth SinTax out of the bottle the other day, too, and it was more robust than any other time I've had it out of a bottle, and tasted closer to how it's been on tap out here.
I'm sure freshness of the beer itself has a lot to do with it, too. I've been taught out here to check the bottling dates of IPAs, and if the bottle is 2+ months past it's bottling, look for something else.
Exactly!Yea, it's not like you're building a website or something hard...Well hurry the fuck up, already!No seasoning yet - all depends on how the hinge seals will depend on my seal. I might not have to do anything, but I might use a thin weather stripping(still undecided since I am just finalizing my hinges)What are you using to seal it? Have you started seasoning?Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Well, YOU are here, aren't you?What is this, Amateur Hour! ;)Rookies! Amiright Shaun? I mean Best Friend!Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
8)Well, YOU are here, aren't you?What is this, Amateur Hour! ;)Rookies! Amiright Shaun? I mean Best Friend!Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Exactly!Yea, it's not like you're building a website or something hard...Well hurry the fuck up, already!No seasoning yet - all depends on how the hinge seals will depend on my seal. I might not have to do anything, but I might use a thin weather stripping(still undecided since I am just finalizing my hinges)What are you using to seal it? Have you started seasoning?Yes - It can change the gap and make the seal different sizesI'm curious about the seal. Does the hinge you select have an effect on it?I am going to go with something like this: http://www.rockler.com/blum-155-zero-protrusion-hinges (http://www.rockler.com/blum-155-zero-protrusion-hinges)So you're going to do an inset, internal/invisible hinge?I have a faceless, full overlay, cabinet, and drawers that pull out and I can't find one that will make the door and side panel 180deg flat(if that makes sense). They get close, but there is always like 1/8" to 1/4" overlap with how the door sits.Go with a nice self-closing European cushion-stop hinge, like the nicer/newer kitchen cabinets haveMaybe just get some tie-down straps, fuck it!Why do you think he is taking a project management class? Just waited a little late for the class or started a little early on the humi, not sure which but I must say that is one nice looking humi without hinges~Don't you decide on that kind of stuff before you build? Kinda like buying a car and not deciding on the tires...Nice fall morning in ND - first Proj Mgmt class tonight. Still trying to decide on the hinges for my tower humidor...ordered some online that I might try and use.another day in paradise, how about you?Good morning Dean!:)Welll ok and a happy fucking Tuesday to you.Morning Mr Bean, Mr Fish and Mr Bryant, nice to see everyone up and cheerful this morning. Forget it's Tuesday and Be Happy! Or at least Be Happy till CG gets here and ruins the day with his Tuesday horror.Mr Bryant was my father and he was not a nice guy, my name is Dean, please call me that!
I got my Fucking Tuesday avi up, what more do you want?
There are only thousands of hinge options to choose from, so it's an element that is a little bit annoying.
More importantant, what kind of knobs/pulls you going to use? I'm sure Dean the affectionato can help with a recommendation.
Here are my pulls: http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u (http://www.homedepot.com/p/Liberty-3-in-Stainless-Steel-Bar-Pulls-4-Pack-P13456L-SS-U1/202824457?N=5yc1vZc29u)
Glad you're able to cover the recaps today Chip. I wouldn't be able to keep up.Anyone remember what Sam paid for those CAOs the last jam? Mashing for cheaper
some Moneys?Glad you're able to cover the recaps today Chip. I wouldn't be able to keep up.Anyone remember what Sam paid for those CAOs the last jam? Mashing for cheaper
No.Glad you're able to cover the recaps today Chip. I wouldn't be able to keep up.Anyone remember what Sam paid for those CAOs the last jam? Mashing for cheaper
There he is!No.Glad you're able to cover the recaps today Chip. I wouldn't be able to keep up.Anyone remember what Sam paid for those CAOs the last jam? Mashing for cheaper
'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
Fuckin' Tuesdays!I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
Use that and that Never Wet crap and you should be set!'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
Here's your answer Dean. As seen on TV...and also available at Walmart. Gotta be good!
http://www.walmart.com/ip/As-Seen-on-TV-Flex-Seal/20850472
Worthless Tuesday for me, banter-wise. I'm gonna wrap things up here so I can rush home to do more work. Have a great afternoon, all.Have a good afternoon Joe!
Glad you're able to cover the recaps today Chip. I wouldn't be able to keep up.Anyone remember what Sam paid for those CAOs the last jam? Mashing for cheaper
Who was that short man?Worthless Tuesday for me, banter-wise. I'm gonna wrap things up here so I can rush home to do more work. Have a great afternoon, all.Have a good afternoon Joe!
Glad you're able to cover the recaps today Chip. I wouldn't be able to keep up.Anyone remember what Sam paid for those CAOs the last jam? Mashing for cheaper
You mean the crown of thorns, Brazilias? I think they were 5/31.
Seems awful quiet today. Work shit just gets in the way.Can't wait for this day to end, too busy to bitch!
Seems awful quiet today. Work shit just gets in the way.Can't wait for this day to end, too busy to bitch!
Hell no, I would bust outta there if I were you! ;)Seems awful quiet today. Work shit just gets in the way.Can't wait for this day to end, too busy to bitch!
Late night for the Warden, so quiet time when I get home. Drink and a cigar should fill that out nicely... ain't making it any easier to still be at the office though.
Afternoon boys. Wining my way east from Denver to Philly. Downright shitty internet on the plan, though. Not that it matters much, most of y'all mofos have left for home already.Not yet, still planning escape route. Howdy, Mark.
Afternoon Shawshank Tony. ;D Don't escape through the sewer this time.Afternoon boys. Wining my way east from Denver to Philly. Downright shitty internet on the plan, though. Not that it matters much, most of y'all mofos have left for home already.Not yet, still planning escape route. Howdy, Mark.
Afternoon boys. Wining my way east from Denver to Philly. Downright shitty internet on the plan, though. Not that it matters much, most of y'all mofos have left for home already.Good afternoon Mark!
Dive deeper next time!I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
He's not used to going very deep, go easy on the poor guy!Dive deeper next time!I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
Already cut it. Wish you had spoken up a little sooner.Dive deeper next time!I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
TWSSDive deeper next time!I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
GFYs!I guess Tuesday just started a little late today ;)
Dang, the mothership banter is still on page 1. Better get the paddles charged up. Clear!-----3b-----Actually, I enjoy the pace and quiet during the day. Gives me a chance to get stuff done, like cleaning bikes and such. Making bird swings for the rest of this week.I hear you. There's now way for me to keep up here during the day, anyway. And bird swings? I'm picturing wire and dowels, or is there more to it?
Time to roll out...have a good night all!Good night, Shaun. Don't go getting unhinged.
It's not terrible, but I only just lit it. Let's give it an opportunity to suck.Dive deeper next time!I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
I hear you. There's now way for me to keep up here during the day, anyway. And bird swings? I'm picturing wire and dowels, or is there more to it?-----3b-----There's a bit more to it, the way I make them. Oh, and afternoon everyone!Your birds are probably pampered with motorized swings, or wind-up at least. And a special coating so that the concrete-bird-poop is easier to clean off.
I hear you. There's now way for me to keep up here during the day, anyway. And bird swings? I'm picturing wire and dowels, or is there more to it?-----3b-----There's a bit more to it, the way I make them. Oh, and afternoon everyone!Hello KC. If only the CigarBanter was printed, then you could line the cage.
This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
No problem, I'm landing in the city of brotherly love. How great is that!This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
When's the Bethlehem herf?Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
Tonight! Didn't you get the ema....oops, nevermind.When's the Bethlehem herf?Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
I'll be there in spirit.Tonight! Didn't you get the ema....oops, nevermind.When's the Bethlehem herf?Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
Definitely smokable. I think this N.Miranda is made at the MF factory. Not overly complex but I'd smoke it again.It's not terrible, but I only just lit it. Let's give it an opportunity to suck.Dive deeper next time!I did a humi dive this morning and that's one I came back up with. I can't remember what else and too lazy to go check.I've had a couple of those Tony, good from smoke from what I recall.'experimented' with a few patches on the roof. managed to get about as much tar on me as I did the roof. terrible stuff.That's more work than most working folk too. I'm looking at a Nestor Miranda Special Selection (nub size) when I get the fuck out of here. Hiya Deano.
Jamie Garcia Reserva Especial toro and water. enough work for on day for a retired person.
Just yanking your chain, there's no herf. Just a quick in and out for me (TWSS). Maybe next trip.I'll be there in spirit.Tonight! Didn't you get the ema....oops, nevermind.When's the Bethlehem herf?Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
Lining comes pre-shatted you mean?I hear you. There's now way for me to keep up here during the day, anyway. And bird swings? I'm picturing wire and dowels, or is there more to it?-----3b-----There's a bit more to it, the way I make them. Oh, and afternoon everyone!Hello KC. If only the CigarBanter was printed, then you could line the cage.
Yank away, my friend. I'm almost there. :)Just yanking your chain, there's no herf. Just a quick in and out for me (TWSS). Maybe next trip.I'll be there in spirit.Tonight! Didn't you get the ema....oops, nevermind.When's the Bethlehem herf?Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
Sort of.Lining comes pre-shatted you mean?I hear you. There's now way for me to keep up here during the day, anyway. And bird swings? I'm picturing wire and dowels, or is there more to it?-----3b-----There's a bit more to it, the way I make them. Oh, and afternoon everyone!Hello KC. If only the CigarBanter was printed, then you could line the cage.
So you're between three pumps and four?Yank away, my friend. I'm almost there. :)Just yanking your chain, there's no herf. Just a quick in and out for me (TWSS). Maybe next trip.I'll be there in spirit.Tonight! Didn't you get the ema....oops, nevermind.When's the Bethlehem herf?Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
You know me too well.So you're between three pumps and four?Yank away, my friend. I'm almost there. :)Just yanking your chain, there's no herf. Just a quick in and out for me (TWSS). Maybe next trip.I'll be there in spirit.Tonight! Didn't you get the ema....oops, nevermind.When's the Bethlehem herf?Not likely....he's heading to PA.This airplane wifi is so crappy I may drop off at anytime. But don't panic, we haven't dropped out of the sky (probably not, anyway). So I'll say happy mofo'in Tuesday to you now, just in case.Be safe, brother.
Evening, muchachos. This actually-having-to-work-all-the-time shit is for the birds. And tonight I have to work late. Suckage.Agreed. But it's better than the alternative. At least you get to watch the titillating jam this evening.
Except that now I have to go spend 90 minutes driving home.Evening, muchachos. This actually-having-to-work-all-the-time shit is for the birds. And tonight I have to work late. Suckage.Agreed. But it's better than the alternative. At least you get to watch the titillating jam this evening.
Must have missed it... didn't see any titillatings on the jam yet.Evening, muchachos. This actually-having-to-work-all-the-time shit is for the birds. And tonight I have to work late. Suckage.Agreed. But it's better than the alternative. At least you get to watch the titillating jam this evening.
Must have been my other browser tab.Must have missed it... didn't see any titillatings on the jam yet.Evening, muchachos. This actually-having-to-work-all-the-time shit is for the birds. And tonight I have to work late. Suckage.Agreed. But it's better than the alternative. At least you get to watch the titillating jam this evening.
Or a link Dean sent you.Must have been my other browser tab.Must have missed it... didn't see any titillatings on the jam yet.Evening, muchachos. This actually-having-to-work-all-the-time shit is for the birds. And tonight I have to work late. Suckage.Agreed. But it's better than the alternative. At least you get to watch the titillating jam this evening.
Evening men. Dammit, the CLE's are up again.Never had the robusto but I'm otherwise a fan.
Indeed. Same here. Why I'm still sitting on the fence.Evening men. Dammit, the CLE's are up again.Never had the robusto but I'm otherwise a fan.
Oh well, did it. I'll bring some to our future NJ herf.Evening men. Dammit, the CLE's are up again.Never had the robusto but I'm otherwise a fan.
My advice? Keep those pickets out of your ass.Indeed. Same here. Why I'm still sitting on the fence.Evening men. Dammit, the CLE's are up again.Never had the robusto but I'm otherwise a fan.