Print

[FloridaDean]

Da Corona Club

nice joint, and they let you have the remote besides.

most of the time I’m the only one there in the afternoon. It’s a must in the winter, Happy we finally have a Club in town.

I wish there was a place close by I could smoke in and enjoy a coffee or water.

[razgueado]

where's RazMan? I need advice on whether I can change spring tension on a Taurus .38 trigger or should I take it to a gunsmith. trigger pull is to hard for lady.

Sorry, was working. What model of Taurus?

.38 Special Ultra-Lite,

Have you done gunsmithing before?

no. nothing other than cleaning.

Well, normally I'd leave triggerwork to a gunsmith. But let me consult with MacGuyver (my friend Dan) and see what he thinks. Will see him at 6:30 PDT and will get back to you a little after that or in the morning.

It's an S&W clone, and he's expert on S&W.

I know I've read a lot on trigger pull tension in articles, pounds of pull, something like that.

There should be a hammer tension adjustment described in your manual for the gun. That's a good part of the battle, right there.

Manual just shows parts.

Looking at the videos I'd feel more comfortable taking it to the local gun shop. they talk about swapping out the hammer spring with a Wolfe 6# spring.

That's always the safest bet. Trigger work is a real art. Best to get an artist.

[FloridaDean]

where's RazMan? I need advice on whether I can change spring tension on a Taurus .38 trigger or should I take it to a gunsmith. trigger pull is to hard for lady.

Sorry, was working. What model of Taurus?

.38 Special Ultra-Lite,

Have you done gunsmithing before?

no. nothing other than cleaning.

Well, normally I'd leave triggerwork to a gunsmith. But let me consult with MacGuyver (my friend Dan) and see what he thinks. Will see him at 6:30 PDT and will get back to you a little after that or in the morning.

It's an S&W clone, and he's expert on S&W.

I know I've read a lot on trigger pull tension in articles, pounds of pull, something like that.

There should be a hammer tension adjustment described in your manual for the gun. That's a good part of the battle, right there.

Manual just shows parts.

Looking at the videos I'd feel more comfortable taking it to the local gun shop. they talk about swapping out the hammer spring with a Wolfe 6# spring.

That's always the safest bet. Trigger work is a real art. Best to get an artist.

yeh, my best bet. I know I'd fuck it up.

[Travellin Dave]

Has anyone here seen the new Blade Runner movie?

Is it animated? Haven't even seen the old one.

Sheesh...it's only 30 years old.

Far older and better movies that I haven't seen.

And you know those other movies you haven't seen are better than this one you haven't seen how?

Never saw One Flew Over the Cuckoo's Nest, Jaws, Saving Private Ryan, Casablanca, Apocalypse Now, to name just a few. Shall I go on?

Watch One Flew Over The Cuckoo's Nest and you'll see what happened to me at 16 back in 1968.

You're Jack Nicholson?

I was treated like him back then. now you know what's wrong with me.

That's just the first chapter.

[Travellin Dave]

Da Corona Club

nice joint, and they let you have the remote besides.

most of the time I’m the only one there in the afternoon. It’s a must in the winter, Happy we finally have a Club in town.

I wish there was a place close by I could smoke in and enjoy a coffee or water.

Isn't that called your garage?

[FloridaDean]

Da Corona Club

nice joint, and they let you have the remote besides.

most of the time I’m the only one there in the afternoon. It’s a must in the winter, Happy we finally have a Club in town.

I wish there was a place close by I could smoke in and enjoy a coffee or water.

Isn't that called your garage?

Yes, but a lounge once in awhile is nice too.

[A Friend of Charlie]

Has anyone here seen the new Blade Runner movie?

Is it animated? Haven't even seen the old one.

Sheesh...it's only 30 years old.

Far older and better movies that I haven't seen.

And you know those other movies you haven't seen are better than this one you haven't seen how?

Never saw One Flew Over the Cuckoo's Nest, Jaws, Saving Private Ryan, Casablanca, Apocalypse Now, to name just a few. Shall I go on?

Watch One Flew Over The Cuckoo's Nest and you'll see what happened to me at 16 back in 1968.

You're Jack Nicholson?

I was treated like him back then. now you know what's wrong with me.

Actually I don't, because I never saw the movie.

[A Friend of Charlie]

Da Corona Club

Nice. You've become a regular.

[A Friend of Charlie]

Has anyone here seen the new Blade Runner movie?

Is it animated? Haven't even seen the old one.

Sheesh...it's only 30 years old.

Far older and better movies that I haven't seen.

And you know those other movies you haven't seen are better than this one you haven't seen how?

Never saw One Flew Over the Cuckoo's Nest, Jaws, Saving Private Ryan, Casablanca, Apocalypse Now, to name just a few. Shall I go on?

No, that's enough to verify that you're culturally illiterate.

Agreed.

[Travellin Dave]

Da Corona Club

nice joint, and they let you have the remote besides.

most of the time I’m the only one there in the afternoon. It’s a must in the winter, Happy we finally have a Club in town.

I wish there was a place close by I could smoke in and enjoy a coffee or water.

Isn't that called your garage?

Yes, but a lounge once in awhile is nice too.

Two Corona lounges in the Orlando area.

[Travellin Dave]

Has anyone here seen the new Blade Runner movie?

Is it animated? Haven't even seen the old one.

Sheesh...it's only 30 years old.

Far older and better movies that I haven't seen.

And you know those other movies you haven't seen are better than this one you haven't seen how?

Never saw One Flew Over the Cuckoo's Nest, Jaws, Saving Private Ryan, Casablanca, Apocalypse Now, to name just a few. Shall I go on?

Watch One Flew Over The Cuckoo's Nest and you'll see what happened to me at 16 back in 1968.

You're Jack Nicholson?

I was treated like him back then. now you know what's wrong with me.

Actually I don't, because I never saw the movie.

You've got some boning up to do, and not with the Mrs.

[Threebean]

Has anyone here seen the new Blade Runner movie?

Is it animated? Haven't even seen the old one.

Sheesh...it's only 30 years old.

Far older and better movies that I haven't seen.

And you know those other movies you haven't seen are better than this one you haven't seen how?

Never saw One Flew Over the Cuckoo's Nest, Jaws, Saving Private Ryan, Casablanca, Apocalypse Now, to name just a few. Shall I go on?

No, that's enough to verify that you're culturally illiterate.

+1

[Travellin Dave]

Dow up over 160 today.  Thanks Trumpf!

[Threebean]

Has anyone here seen the new Blade Runner movie?

Is it animated? Haven't even seen the old one.

Sheesh...it's only 30 years old.

Far older and better movies that I haven't seen.

And you know those other movies you haven't seen are better than this one you haven't seen how?

Never saw One Flew Over the Cuckoo's Nest, Jaws, Saving Private Ryan, Casablanca, Apocalypse Now, to name just a few. Shall I go on?

Watch One Flew Over The Cuckoo's Nest and you'll see what happened to me at 16 back in 1968.

You're Jack Nicholson?

I was treated like him back then. now you know what's wrong with me.

Actually I don't, because I never saw the movie.

You've got some boning up to do, and not with the Mrs.

He's too busy keeping up with the cooking shows.  With Christmas coming I'd better swing by Magnolia Market in Waco and pick up gifts for you and the Mayor.  $75 sweatshirt for you, $75 apron for the Mayor.

[Threebean]

Dow up over 160 today.  Thanks Trumpf!

Damn straight!  About time you came around (TWSS).