CigarBanter
Cigar Banter => Daily Cigar Deals Discussion => Topic started by: CigarBanter on January 11, 2016, 12:00:02 AM
-
Happy Monday! Are there any cigar deals out there today to be had? Join in this discussion and perhaps learn something about cigars along the way. Warning: don't proceed if you have thin skin but don't be afraid to post either... And welcome aboard!
-
Good morning guys.
-
Today is Monday, Jan. 11, the 11th day of 2016. There are 355 days left in the year.
-
Today's Highlight in History:
On Jan. 11, 1964, U.S. Surgeon General Luther Terry issued "Smoking and Health," a report which concluded that "cigarette smoking contributes substantially to mortality from certain specific diseases and to the overall death rate."
-
On this date:
-
In 1861, Alabama became the fourth state to withdraw from the Union.
-
In 1908, President Theodore Roosevelt proclaimed the Grand Canyon National Monument (it became a national park in 1919).
-
In 1913, the first enclosed sedan-type automobile, a Hudson, went on display at the 13th National Automobile Show in New York.
-
In 1927, the creation of the Academy of Motion Picture Arts and Sciences was proposed during a dinner of Hollywood luminaries at the Ambassador Hotel in Los Angeles.
-
In 1935, aviator Amelia Earhart began an 18-hour trip from Honolulu to Oakland, California, that made her the first person to fly solo across any part of the Pacific Ocean.
-
In 1942, Japan declared war against the Netherlands, the same day that Imperial Japanese forces invaded the Dutch East Indies.
-
In 1946, the People's Republic of Albania was proclaimed after King Zog was formally deposed by the Communists.
-
In 1966, Swiss artist Alberto Giacometti, 64, died in Chur.
-
In 1977, France set off an international uproar by releasing Abu Daoud, a PLO official behind the massacre of Israeli athletes at the 1972 Munich Olympics.
-
In 1989, nine days before leaving the White House, President Ronald Reagan bade the nation farewell in a prime-time address, saying of his eight years in office: "We meant to change a nation and instead we changed a world."
-
In 1995, 51 people were killed when a Colombian DC-9 jetliner crashed as it was preparing to land near the Caribbean resort of Cartagena — however, 9-year-old Erika Delgado survived.
-
In 2010, Mark McGwire admitted to The Associated Press that he'd used steroids and human growth hormone when he broke baseball's home run record in 1998.
-
Ten years ago: A Georgian court convicted Vladimir Arutyunian of trying to assassinate President George W. Bush and Georgian President Mikhail Saakashvili (sah-kahsh-VIH'-leh) with a grenade in Tbilisi (tuh-BLEE'-see) on May 10, 2005, and sentenced him to life in prison. Gunmen stormed an offshore oil platform run by Royal Dutch Shell in Nigeria and seized the workers, an American, a Briton, a Bulgarian and a Honduran. (The four were freed nearly three weeks later.)
-
Five years ago: Several hundred mourners remembered the victims of the Arizona shooting rampage during a public Mass at St. Odilia Catholic Church in Tucson. David Nelson, 74, who co-starred on his parents' popular TV show "The Adventures of Ozzie and Harriet," died in Los Angeles.
-
One year ago: More than a million people surged through the boulevards of Paris behind dozens of world leaders walking arm-in-arm in a rally for unity against three days of terror that killed 17 people and changed France. At the 72nd Golden Globes, the movie "Boyhood" won best dramatic picture while "The Grand Budapest Hotel" was named best musical or comedy picture; in the TV categories, "The Affair" was named best dramatic series while "Transparent" was named best musical or comedy series. Anita Ekberg, 83, the Swedish-born actress and sex symbol of the 1950s and 1960s, died in Rome.
-
Today's Birthdays: Producer Grant Tinker is 91. The former prime minister of Canada, Jean Chretien (zhahn kray-tee-EHN'), is 82. Actor Mitchell Ryan is 82. Actor Felix Silla is 79. Movie director Joel Zwick is 74. Country singer Naomi Judd is 70. World Golf Hall of Famer Ben Crenshaw is 64. Singer Robert Earl Keen is 60. Actress Phyllis Logan (TV: "Downton Abbey") is 60. Musician Vicki Peterson (The Bangles) is 58. Actress Kim Coles is 54. Actor Jason Connery is 53. Former child actress Dawn Lyn (TV: "My Three Sons") is 53. Contemporary Christian musician Jim Bryson (MercyMe) is 48. Rock musician Tom Dumont (No Doubt) is 48. Movie director Malcolm D. Lee is 46. Singer Mary J. Blige is 45. Musician Tom Rowlands (The Chemical Brothers) is 45. Actor Marc Blucas is 44. Actress Amanda Peet is 44. Actor Rockmond Dunbar is 43. Actress Aja Naomi King is 31. Actress Kristolyn Lloyd is 31. Reality TV star Jason Wahler (TV: "Laguna Beach"; "The Hills") is 29. Pop singer Cody Simpson is 19.
-
Thought for Today: "Je sais que je ne sais pas ce que je ne sais pas." (I know that I don't know what I don't know.) — Marguerite Youcenar, French author (1903-1987).
-
Cough
-------------------------
The owner of a drugstore walks in to find a guy leaning heavily against a
wall with an odd look on his face.
The owner asks the clerk, "What's with that guy over there by the wall?"
The clerk says, "Well, he came in here at 7 A.M. to get something for his
cough. I couldn't find the cough syrup, so I gave him an entire bottle of
laxatives."
The owner says, "You idiot! You can't treat a cough with laxatives!"
The clerk says, "Oh yeah? Look at him-he's afraid to cough!"
-
Morning, Chip.
-
Morning, Chip.
Good morning Dave.
-
Morning LSU & Golf. Guess it is Monday again.
-
Morning LSU & Golf. Guess it is Monday again.
Sure is over at the Page. Looks like they've taken a page out of Famous's IT booklet.
-
Morning LSU & Golf. Guess it is Monday again.
Sure is over at the Page. Looks like they've taken a page out of Famous's IT booklet.
Guess the flashlight and knife specials fried the site.
-
Morning LSU & Golf. Guess it is Monday again.
Sure is over at the Page. Looks like they've taken a page out of Famous's IT booklet.
Guess the flashlight and knife specials fried the site.
Gonna be a scorcher today, I can feel it. So long as the site gets back up, that is.
-
Morning LSU & Golf. Guess it is Monday again.
Sure is over at the Page. Looks like they've taken a page out of Famous's IT booklet.
Guess the flashlight and knife specials fried the site.
Gonna be a scorcher today, I can feel it. So long as the site gets back up, that is.
Did not have one last week so overdue but I thought they would have one over the weekend- wrong. :(
-
Pretty cold up your way isn't it Golf?
34 here high of 51 and mostly sunny. Warming back up some tomorrow.
-
Morning LSU & Golf. Guess it is Monday again.
Good morning Native.
-
Pretty cold up your way isn't it Golf?
34 here high of 51 and mostly sunny. Warming back up some tomorrow.
Feel like temperature this morning of 24° but headed to 50° later today. Brrrrrrrrr!
-
Pretty cold up your way isn't it Golf?
34 here high of 51 and mostly sunny. Warming back up some tomorrow.
Feel like temperature this morning of 24° but headed to 50° later today. Brrrrrrrrr!
Chilly, feel like here is the same as the temperature but we were supposed to be in the 20's this morning.
-
Time to ready for the commute, BBL
-
Pretty cold up your way isn't it Golf?
34 here high of 51 and mostly sunny. Warming back up some tomorrow.
Yep, in the teens, with wind chills at -13 right now. Getting even colder tomorrow and Wednesday, before climbing back up a bit the end of the week.
-
good morning Chip and Daves. freeze warnings out here. 41° though. EPC 2nd corona and coffee.
I love Mondays.
-
good morning Chip and Daves. freeze warnings out here. 41° though. EPC 2nd corona and coffee.
I love Mondays.
Good morning Dean.
-
Pretty cold up your way isn't it Golf?
34 here high of 51 and mostly sunny. Warming back up some tomorrow.
Yep, in the teens, with wind chills at -13 right now. Getting even colder tomorrow and Wednesday, before climbing back up a bit the end of the week.
Screw that!
-
Pretty cold up your way isn't it Golf?
34 here high of 51 and mostly sunny. Warming back up some tomorrow.
Yep, in the teens, with wind chills at -13 right now. Getting even colder tomorrow and Wednesday, before climbing back up a bit the end of the week.
Screw that!
I know, it's bullshit.
-
good morning Chip and Daves. freeze warnings out here. 41° though. EPC 2nd corona and coffee.
I love Mondays.
Pussies! Morning, Dean.
-
good morning Chip and Daves. freeze warnings out here. 41° though. EPC 2nd corona and coffee.
I love Mondays.
Pussies! Morning, Dean.
I came to Florida to get warm. once it drops below 70 I'm cold.
-
Looks like the Page is back up, ready for today's scorcher.
-
good morning Chip and Daves. freeze warnings out here. 41° though. EPC 2nd corona and coffee.
I love Mondays.
Pussies! Morning, Dean.
I came to Florida to get warm. once it drops below 70 I'm cold.
Well, no doubt. But a freeze warning? Sheesh!
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
-
Good morning boys, another full week to look forward to (GFYs Tex & Dean) before a day off next Monday. Son had a 6:00 AM hockey game yesterday so I feel a little more tired than usual
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
They just don't have as much cool sh!t.
-
Good morning boys, another full week to look forward to (GFYs Tex & Dean) before a day off next Monday. Son had a 6:00 AM hockey game yesterday so I feel a little more tired than usual
On a Sunday morning? Now that's some bullshit.
-
Morning Chip, Dean, Daves, and HockeyDadFish. Gonna be a busy week, not even considering the big game tonight.
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
They better ship with a box of bandaids. You know, just in case.
-
Morning Chip, Dave, Dave, Dean, Bean and Fishmeister.
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
It's a new site, give them some time.
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
They better ship with a box of bandaids. You know, just in case.
Always helpful.
-
Morning Chip, Dean, Daves, and HockeyDadFish. Gonna be a busy week, not even considering the big game tonight.
Big game tonight? Which one?
-
Morning Chip, Dean, Daves, and HockeyDadFish. Gonna be a busy week, not even considering the big game tonight.
Big game tonight? Which one?
Alabama's playing some scrubs so they can walk to another title, the name escapes me
-
Morning Chip, Dean, Daves, and HockeyDadFish. Gonna be a busy week, not even considering the big game tonight.
Big game tonight? Which one?
Alabama's playing some scrubs so they can walk to another title, the name escapes me
Still bitter about him outbidding you, eh? ;D
-
Good morning, men.
-
Good morning, men.
Morning, Captain.
-
Morning Chip, Dean, Daves, and HockeyDadFish. Gonna be a busy week, not even considering the big game tonight.
Big game tonight? Which one?
Alabama's playing some scrubs so they can walk to another title, the name escapes me
Still bitter about him outbidding you, eh? ;D
He does carry grudges...
-
Morning Mr. Mayor.
-
Good morning, men.
Morning Uncle Tone.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
-
Morning Mr. Mayor.
Howdy, Dave.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
It's a new site, give them some time.
The $10 marble ashtray not a bad deal. A good size and heft (TWSS)
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
Oh boy, another botl doing home improvement projects? Take care of what you need to and get to Hamburg this weekend!
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
It's a new site, give them some time.
Bullshit!
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
He's shitting in a dirt hole in the back yard, does that about answer your question? ;D
If things were any worse, he'd be CG at a bachelor party
-
Morning GFY Fish, Dean, Travellin Tiger Dave, CheapoStar Mayor and Bean.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
Oh boy, another botl doing home improvement projects? Take care of what you need to and get to Hamburg this weekend!
That's the goal. It's my sister-in-law's 50th birthday and I think we have plans. Hopefully they are late enough in the day that it won't be an issue.
-
morning Tony, Scott, Mark, and more Daves.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
Oh boy, another botl doing home improvement projects? Take care of what you need to and get to Hamburg this weekend!
That's the goal. It's my sister-in-law's 50th birthday and I think we have plans. Hopefully they are late enough in the day that it won't be an issue.
Hahahahahahahahahahahahahahahahahahahahahahahahaha!!! Timing is ALWAYS your issue!!
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
Oh boy, another botl doing home improvement projects? Take care of what you need to and get to Hamburg this weekend!
That's the goal. It's my sister-in-law's 50th birthday and I think we have plans. Hopefully they are late enough in the day that it won't be an issue.
Hahahahahahahahahahahahahahahahahahahahahahahahaha!!! Timing is ALWAYS your issue!!
TWSS
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
-
morning Tony, Scott, Mark, and more Daves.
Morning Dean, we heard from your penis yesterday
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
Jig? We don't need no stinkin' jig!
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
He's shitting in a dirt hole in the back yard, does that about answer your question? ;D
If things were any worse, he'd be CG at a bachelor party
Boy, that WOULD be worse.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
Oh, so it's going to be your bedroom down there?
-
morning Tony, Scott, Mark, and more Daves.
Hiya, Deano. You working again this week?
-
morning Tony, Scott, Mark, and more Daves.
Morning Dean, we heard from your penis yesterday
glad somebody did, been a few days since I've heard from him.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
-
morning Tony, Scott, Mark, and more Daves.
Morning Dean, we heard from your penis yesterday
Yeah DAWG said you had been beating him a lot lately.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
The bad news is she ain't afraid of you and she will be on your ass!
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
And the cheapo beano could have just bought cabinets with the crown on them but they cost more so he has been fuk'n with them for 2 weeks and not done yet. ;D
-
morning Tony, Scott, Mark, and more Daves.
Hiya, Deano. You working again this week?
ahhhh, no. free until the weekend. going to St Augustine Beach Friday through Monday.
-
morning Tony, Scott, Mark, and more Daves.
Morning Dean, we heard from your penis yesterday
Yeah DAWG said you had been beating him a lot lately.
you must have been mistaken, the lady abuses him a lot, just not lately.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
Oh boy, another botl doing home improvement projects? Take care of what you need to and get to Hamburg this weekend!
That's the goal. It's my sister-in-law's 50th birthday and I think we have plans. Hopefully they are late enough in the day that it won't be an issue.
Hahahahahahahahahahahahahahahahahahahahahahahahaha!!! Timing is ALWAYS your issue!!
It hurts because it's true.
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
It's a new site, give them some time.
Bullshit!
Oops....what happened to the Sunday sunshine?
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
It's a new site, give them some time.
Bullshit!
Oops....what happened to the Sunday sunshine?
It's Monday and Office Meeting Monday at that.
-
morning Tony, Scott, Mark, and more Daves.
Morning Dean, we heard from your penis yesterday
glad somebody did, been a few days since I've heard from him.
Oh, sorry to hear that, I feel sorry for you
......wait.......no I don't.....not in the least......
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
-
Looks like the Page is back up, ready for today's scorcher.
Actually not a bad deal on the Skull Breakers
You sure you don't want a bowie knife, in memoriam?
I'm just disappointed there's no cheese or venison jerky
It's a new site, give them some time.
Bullshit!
Oops....what happened to the Sunday sunshine?
It was replaced by wind and cold
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
Oh, so it's going to be your bedroom down there?
I hadn't thought of that. Hmmm. Really gotta finish the detached garage so I can smoke in there.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
Oh, so it's going to be your bedroom down there?
I hadn't thought of that. Hmmm. Really gotta finish the detached garage so I can smoke in there.
How far is Hamburg for you? The Superstore was my first choice because it's 20 -25 min closer but my BIL wants to go to Cabellas's also
-
GMornin fellas
-
GMornin fellas
Oh, hey CG!
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
-
GMornin fellas
Oh, hey CG!
Howdy Scott!
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Crazy shit, that team is just so far ahead of other FCS schools it's crazy. GMornin Tex
-
morning Tony, Scott, Mark, and more Daves.
Hiya, Deano. You working again this week?
ahhhh, no. free until the weekend. going to St Augustine Beach Friday through Monday.
Nice. Hope the weather holds up.
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
Oh, so it's going to be your bedroom down there?
I hadn't thought of that. Hmmm. Really gotta finish the detached garage so I can smoke in there.
How far is Hamburg for you? The Superstore was my first choice because it's 20 -25 min closer but my BIL wants to go to Cabellas's also
I'd say 2.5 hours from me.
-
GMornin fellas
Good morning, Shaun. How goes it?
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
Oh, so it's going to be your bedroom down there?
I hadn't thought of that. Hmmm. Really gotta finish the detached garage so I can smoke in there.
How far is Hamburg for you? The Superstore was my first choice because it's 20 -25 min closer but my BIL wants to go to Cabellas's also
I'd say 2.5 hours from me.
Yeah that's ridiculous
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
-
Good morning, men.
Morning, Captain.
I'm off this week. Home project is under way. So .
So instead of going to work you are working at home for the Warden, good fuk'n luck.
The good news is she's afraid of the basement, so hopefully I won't see her too much.
Oh, so it's going to be your bedroom down there?
I hadn't thought of that. Hmmm. Really gotta finish the detached garage so I can smoke in there.
How far is Hamburg for you? The Superstore was my first choice because it's 20 -25 min closer but my BIL wants to go to Cabellas's also
I'd say 2.5 hours from me.
Yeah that's ridiculous
Not at all. Maybe less than that. I won't commit yet but I just may show up.
-
GMornin fellas
Good morning, Shaun. How goes it?
Good mornin Uncle T - it goes well, just really fuckin cold. -12 on the way to work this morning.
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
I'm on pins and needles.
-
New manager starting for our team today. Just had the last guy broken in, too.
-
New manager starting for our team today. Just had the last guy broken in, too.
Oh boy, good luck getting him/her/it trained.
-
New manager starting for our team today. Just had the last guy broken in, too.
Oh boy, good luck getting him/her/it trained.
Give him/her/it hell!
-
GMornin fellas
Good morning, Shaun. How goes it?
Good mornin Uncle T - it goes well, just really fuckin cold. -12 on the way to work this morning.
That definitely qualifies as f'n cold. Morning, Shaun!
-
GMornin fellas
Good morning, Shaun. How goes it?
Good mornin Uncle T - it goes well, just really fuckin cold. -12 on the way to work this morning.
Ouch.
-
GMornin fellas
Good morning, Shaun. How goes it?
Good mornin Uncle T - it goes well, just really fuckin cold. -12 on the way to work this morning.
That definitely qualifies as f'n cold. Morning, Shaun!
Good mornin Mark - it's a bitch out there, should warm up the next few days hopefully.
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
My apologies. I concede the floor to you so that you can enlighten us with posts of brilliance.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
I'm on pins and needles.
Just imagine the excitement of being there and waiting....
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
My apologies. I concede the floor to you so that you can enlighten us with posts of brilliance.
Thanks, Obama.
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
My apologies. I concede the floor to you so that you can enlighten us with posts of brilliance.
GFY
-
Morning YellowStar.
-
No fuggin' scorcher. Sheesh!
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
My apologies. I concede the floor to you so that you can enlighten us with posts of brilliance.
[/GFYb]
Well said.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
-
No fuggin' scorcher. Sheesh!
Sheesh, No Knives either.
-
Sorry the week isn't starting out great for you TexDave....I liked your AVI so much better yesterday....
-
No fuggin' scorcher. Sheesh!
Bit of a switch from the Astral's however.
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
My apologies. I concede the floor to you so that you can enlighten us with posts of brilliance.
[/GFYb]
Well said.
Seems as though TxDave's brief attempt at positiveness caused a backup, and his sphincter muscle just couldn't take it any longer.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
My apologies. I concede the floor to you so that you can enlighten us with posts of brilliance.
[/GFYb]
Well said.
Seems as though TxDave's brief attempt at positiveness caused a backup, and his sphincter muscle just couldn't take it any longer.
LALTS
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
-
Sorry the week isn't starting out great for you TexDave....I liked your AVI so much better yesterday....
GFY
-
DOES ANYBODY GIVE A CHIT IF TONY GOES TO HAMBURG OR NOT?
My apologies. I concede the floor to you so that you can enlighten us with posts of brilliance.
[/GFYb]
Well said.
Seems as though TxDave's brief attempt at positiveness caused a backup, and his sphincter muscle just couldn't take it any longer.
[/GFYb]
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
You just need to root for the right teams. Sheesh.
-
Just saw that David Bowie has died.
Just released an album this week as well.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Snatching defeat from the jaws of victory for sure.
-
I thought it pretty strange that 4 of 4 home field advantage teams all lost.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
-
I thought it pretty strange that 4 of 4 home field advantage teams all lost.
Completely agree - I went 4/4 on my picks and I honestly thought I could have picked all 4 incorrect before the games started.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seems at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
I think it is called shop built/site hung custom cabinetry.
-
mornin' folks.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
EDIT:
Eff you Tony for making me write this out...Rookies, sheesh
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The hands could have been related to the weather, IMHO.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seems at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
I think it is called shop built/site hung custom cabinetry.
Bottom line is that there's no way to cheat these things, learn it or hire a professional
-
mornin' folks.
Morning SS
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
-
Either my normally very reliable watch just died or the one year old 3 year warranty battery quit one of the two. Always Something!
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
Agrees, he's a good punter too - and it sucks cause he was wearing gloves...can't believe he couldn't tough it out for 60seconds and get a proper hold.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Yipped It Left Right?
-
I thought it pretty strange that 4 of 4 home field advantage teams all lost.
And all three of the 5-7 teams invited to college bowls won.
Year of the underdog for sure, go Tigers!
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Not sure nerves could put that much side spin on it. That was an epic duck hook.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
Agrees, he's a good punter too - and it sucks cause he was wearing gloves...can't believe he couldn't tough it out for 60seconds and get a proper hold.
Donald Trump: NFL ‘football has become soft like our country has become soft’
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Yipped It Left Right?
We call it a 'pull hook' in the golf world
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
-
Either my normally very reliable watch just died or the one year old 3 year warranty battery quit one of the two. Always Something!
Since the battery is the same for a 1 year and 3-year warranty and all your doing is buying an insurance policy, take them up on it and get your free replacement!
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
Yeah, factory installed would only work on stand-alone cabinets. And so many varieties of crown molding out there I don't see how a cabinet mfg would offer that option.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
Doesn't matter, it's the reason they don't sell cabinets with crown attached. I've completely lost interest in this subject
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
Agrees, he's a good punter too - and it sucks cause he was wearing gloves...can't believe he couldn't tough it out for 60seconds and get a proper hold.
Donald Trump: NFL ‘football has become soft like our country has become soft’
He's already tired of picking on the Clintons, has to take on the NFL?
If he's president, bet he will throw out that pussy concussion protocol and targeting penalties....let 'em play.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
Yeah, factory installed would only work on stand-alone cabinets. And so many varieties of crown molding out there I don't see how a cabinet mfg would offer that option.
Right, not to mention it'd be a packaging/breakage nightmare
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
Doesn't matter, it's the reason they don't sell cabinets with crown attached. I've completely lost interest in this subject
You missed the transition opportunity Fishy.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
Yeah, factory installed would only work on stand-alone cabinets. And so many varieties of crown molding out there I don't see how a cabinet mfg would offer that option.
Right, not to mention it'd be a packaging/breakage nightmare
I thought you were done talking about it?
-
Either my normally very reliable watch just died or the one year old 3 year warranty battery quit one of the two. Always Something!
Since the battery is the same for a 1 year and 3-year warranty and all your doing is buying an insurance policy, take them up on it and get your free replacement!
Oh I will and they are very good about taking care of things just a pain in the ass to go get it done.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
Doesn't matter, it's the reason they don't sell cabinets with crown attached. I've completely lost interest in this subject
DOES ANYBODY GIVE A CHIT THAT FISH HAS COMPLETELY LOST INTEREST?
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
Doesn't matter, it's the reason they don't sell cabinets with crown attached. I've completely lost interest in this subject
Someone say hinges and feet?
-
G'Morning, Folks... Football ain't over yet.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
Yeah, factory installed would only work on stand-alone cabinets. And so many varieties of crown molding out there I don't see how a cabinet mfg would offer that option.
Right, not to mention it'd be a packaging/breakage nightmare
I thought you were done talking about it?
I find it painful
-
G'Morning, Folks... Football ain't over yet.
Mornin' BS
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
Doesn't matter, it's the reason they don't sell cabinets with crown attached. I've completely lost interest in this subject
DOES ANYBODY GIVE A CHIT THAT FISH HAS COMPLETELY LOST INTEREST?
I've also lost interest in your large red letters
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Yipped It Left Right?
We call it a 'pull hook' in the golf world
If you meant to do it, call it a draw... when you don't, snap hook.
Hey CG. How's about those BI-Zun! Not even close.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
last time my warden ordered cabinets, it was 10% more for the crown molding, and another 10% for the chocolate wash finish. that on already expensive rock maple cabinets. Contractors burnt out a drill or two putting them up. Good morning boys....
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
Doesn't matter, it's the reason they don't sell cabinets with crown attached. I've completely lost interest in this subject
DOES ANYBODY GIVE A CHIT THAT FISH HAS COMPLETELY LOST INTEREST?
I've also lost interest in your large red letters
LIGAF
-
Using a coping saw is a lost art, but I don't like to brag. ;D
-
No one give a chit today!
-
G'Morning, Folks... Football ain't over yet.
Mornin' BS
Hey there, Sammie. Though them Skins would keep it closer... Fvckin discount double check
-
No one give a chit today!
CNS
-
Golf goin' for the Oscuros today, huh...
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
-
Using a coping saw is a lost art, but I don't like to brag. ;D
U are probably one of 5 under age 100 if you. can use one well
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
But a slightly worse deal than I would've gotten.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
This is a bathroom, not a kitchen. How many friggin cabinets do you have to hang. What all you storing in there? Putting in a wardrobe for costumes as well?
Doesn't matter, it's the reason they don't sell cabinets with crown attached. I've completely lost interest in this subject
Someone say hinges and feet?
Feet don't come on cabinets. They are supposed to be part of tower humidors however.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Yipped It Left Right?
We call it a 'pull hook' in the golf world
If you meant to do it, call it a draw... when you don't, snap hook.
Hey CG. How's about those BI-Zun! Not even close.
Just remember, it's Bi-Zon not Biceson
and Clem-Son, not Clem-Zen. (Clemp-Son is also acceptable for old schoolers)
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
:-X
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
But a slightly worse deal than I would've gotten.
Somebody currently winning at 34?
-
Morning Sam and Steve.
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
But a slightly worse deal than I would've gotten.
Somebody currently winning at 34?
Yeah, me. I just meant if they outbid me, they'd get a slightly worse deal. Cause they'd be paying more.
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
But a slightly worse deal than I would've gotten.
Haha... slightly. MrAtlantic took his at $43.
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
But a slightly worse deal than I would've gotten.
Somebody currently winning at 34?
Yeah, me. I just meant if they outbid me, they'd get a slightly worse deal. Cause they'd be paying more.
Yea, saw that so I held back.
-
Just saw that David Bowie has died.
Just released an album this week as well.
Oh shit, really?!?
-
Golf goin' for the Oscuros today, huh...
That just means someone else will get a good deal
But a slightly worse deal than I would've gotten.
Somebody currently winning at 34?
Yeah, me. I just meant if they outbid me, they'd get a slightly worse deal. Cause they'd be paying more.
Yea, saw that so I held back.
You're a fine human being. Though, SharkFish may not agree. 8)
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
I wasn't clear. I was sarcastically saying, where does logic fit into our discussion?
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
I wasn't clear. I was sarcastically saying, where does logic fit into our discussion?
Or any of our discussions, for that matter.
-
Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish. And the wife still has to pick out some mirrors. And two medicine cabinets. And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work. We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets. I have no idea if they were available with the crown molding pre-installed. Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
I wasn't clear. I was sarcastically saying, where does logic fit into our discussion?
Or any of our discussions, for that matter.
#cabinettalk
-
Using a coping saw is a lost art, but I don't like to brag. ;D
U are probably one of 5 under age 100 if you. can use one well
Not true, it's still the only way to get a tight inside corner on crown (If you know what you're doing)
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
-
Just saw that David Bowie has died.
Just released an album this week as well.
Oh shit, really?!?
"Blackstar" was released on Friday.
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Why didn't you do that when it was 60 degrees on Saturday?
-
Just saw that David Bowie has died.
Just released an album this week as well.
Oh shit, really?!?
"Blackstar" was released on Friday.
Didn't sound that great, but will probably sell millions now.
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
I don't even know. It's a box pressed huge RG without a band. Don't know where it came from. Way too fucking big but it has some nice dark chocolate notes. It stays out of my face while working so it works.
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Why didn't you do that when it was 60 degrees on Saturday?
Because I had other things to do. This way I'm not taking up any quality family time.
-
Good morning kids ..... Geez, 15 pages and it's only 10am....?
-
Morning, muchachos. The State of Washington is offering safe refuge for the Seahawks MVP of yesterday's wild-card game - Blair Walsh.
-
Good morning kids ..... Geez, 15 pages and it's only 10am....?
Morning Dad
-
Morning Razmundos
-
Only a one hour monthly office meeting today, holy cow that is a new record!
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
I don't even know. It's a box pressed huge RG without a band. Don't know where it came from. Way too fucking big but it has some nice dark chocolate notes. It stays out of my face while working so it works.
none of those raspberry thumbprint overtones? ::)
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home. not my favorite saw, but pretty versatile.
-
Morning Sam and Steve.
Hi Dave!
-
Morning Razmundos
Morning, Tex. Need a backup pistole in .40 S&W for my trip to Frontsight in April. Needs to be on the less expensive side due to my purchase of the AR-15 and planned purchase of a hunting rifle later in the year. Recommendations?
-
Good morning Raz, BD & Flip too.
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
-
Morning BD, Raz and Flip.
-
Morning BD, Raz and Flip.
Morning, TD and Sam.
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
-
Only a one hour monthly office meeting today, holy cow that is a new record!
Years ago my office of around 36 people (90% women), had a meeting with our Division Head (also a women.) Coffee, juice, cookies and donuts had been placed out for us. After 30 minutes and the points of the meeting had been said, the Division Head said, "Are there any other points you would like to go over..?" With that, the next 2 hours turned into a bitch fest. Everything from the toilet tissue is not soft enough to, she said, she said, she get's and I don't get, and etc.... After the meeting the Division Head came over to me and said, "Your the only one that didn't have anything to say...!" I replied, "Well, where else can I get free coffee and juice, eat donuts and cookies, get paid for not working, and get to watch such a fine soap opera for 2 hours...?" She laughed and said, "You the only one that get's it..." And we both laughed.
-
HAPPY BIRTHDAY FB.....I know you will be lurking here today.
-
Just saw that David Bowie has died.
Just released an album this week as well.
Oh shit, really?!?
"Blackstar" was released on Friday.
Didn't sound that great, but will probably sell millions now.
I wonder what it will say if you play it backwards...???
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
-
LeBijou 1922 PR's on the mash today... 20/$76.29=catsrule w/Free ship
BOOM!
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
All right, who the hell chit in Golfin' Dave's Wheaties this morning??
-
LeBijou 1922 PR's on the mash today... 20/$76.29=catsrule w/Free ship
BOOM!
Oh damn.
-
Morning Razmundos
Morning, Tex. Need a backup pistole in .40 S&W for my trip to Frontsight in April. Needs to be on the less expensive side due to my purchase of the AR-15 and planned purchase of a hunting rifle later in the year. Recommendations?
Single or Double stack and reasonable carry size or full size?
-
LeBijou 1922 PR's on the mash today... 20/$76.29=catsrule w/Free ship
BOOM!
Oh damn.
SOLD! Thanks BS, I probably would not have even looked at it.
-
Morning Razmundos
Morning, Tex. Need a backup pistole in .40 S&W for my trip to Frontsight in April. Needs to be on the less expensive side due to my purchase of the AR-15 and planned purchase of a hunting rifle later in the year. Recommendations?
Single or Double stack and reasonable carry size or full size?
Hmm...let's say reasonable carry size, since it will be backing up the full-size Glock.
-
Morning Razmundos
Morning, Tex. Need a backup pistole in .40 S&W for my trip to Frontsight in April. Needs to be on the less expensive side due to my purchase of the AR-15 and planned purchase of a hunting rifle later in the year. Recommendations?
Single or Double stack and reasonable carry size or full size?
Hmm...let's say reasonable carry size, since it will be backing up the full-size Glock.
So like a Glock 27 or Springfield XDs size?
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
All right, who the hell chit in Golfin' Dave's Wheaties this morning??
Honey Nut Cheerios ;)
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
Some TexDave climb up your butt or something??
-
Morning Razmundos
Morning, Tex. Need a backup pistole in .40 S&W for my trip to Frontsight in April. Needs to be on the less expensive side due to my purchase of the AR-15 and planned purchase of a hunting rifle later in the year. Recommendations?
Single or Double stack and reasonable carry size or full size?
Hmm...let's say reasonable carry size, since it will be backing up the full-size Glock.
So like a Glock 27 or Springfield XDs size?
Not subcompact. I like all my fingers on the grip.
-
Morning Razmundos
Morning, Tex. Need a backup pistole in .40 S&W for my trip to Frontsight in April. Needs to be on the less expensive side due to my purchase of the AR-15 and planned purchase of a hunting rifle later in the year. Recommendations?
Single or Double stack and reasonable carry size or full size?
Hmm...let's say reasonable carry size, since it will be backing up the full-size Glock.
So like a Glock 27 or Springfield XDs size?
Not subcompact. I like all my fingers on the grip.
TWSS!
-
LeBijou 1922 PR's on the mash today... 20/$76.29=catsrule w/Free ship
BOOM!
Oh damn.
SOLD! Thanks BS, I probably would not have even looked at it.
At the rate you're buying cigars, you'll have to work another year
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
All right, who the hell chit in Golfin' Dave's Wheaties this morning??
Honey Nut Cheerios ;)
Alright, who dipped their nuts in your Cheerios? Damn Nate
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
Some TexDave climb up your butt or something??
CNS
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
All right, who the hell chit in Golfin' Dave's Wheaties this morning??
Honey Nut Cheerios ;)
Alright, who dipped their nuts in your Cheerios? Damn Nate
Don't bother asking the question if you're just gonna answer it. Lol
-
Morning Razmundos
Morning, Tex. Need a backup pistole in .40 S&W for my trip to Frontsight in April. Needs to be on the less expensive side due to my purchase of the AR-15 and planned purchase of a hunting rifle later in the year. Recommendations?
Single or Double stack and reasonable carry size or full size?
Hmm...let's say reasonable carry size, since it will be backing up the full-size Glock.
So like a Glock 27 or Springfield XDs size?
Not subcompact. I like all my fingers on the grip.
Put an extended magazine in it ;) Be aware that deals and selections are neither very good right now!! Ruger SR40 might be a good choice. I would consider a M&P 40C, FNS 40C, Glock 23.
I am going to send you a link for M&P 40C at the best deal I know of Now at a reputable supplier.
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
-
LeBijou 1922 PR's on the mash today... 20/$76.29=catsrule w/Free ship
BOOM!
Oh damn.
SOLD! Thanks BS, I probably would not have even looked at it.
At the rate you're buying cigars, you'll have to work another year
???
-
Off to get something for lunch. BBL
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
I had been thinking about the S&W. Thanks. I've got until March to find a deal, so won't rush it.
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
All right, who the hell chit in Golfin' Dave's Wheaties this morning??
Honey Nut Cheerios ;)
Hey, I skipped breakfast...! Oh, but I did take a shit...
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
I had been thinking about the S&W. Thanks. I've got until March to find a deal, so won't rush it.
Found brother Bean a 9c in the smith for $379/FS No CC Fee but probably never see that price again this year Thanks Obummer!
Gunbuyer.com has some great weekly sale prices if they happen to put up something you want.
-
LeBijou 1922 PR's on the mash today... 20/$76.29=catsrule w/Free ship
BOOM!
Oh damn.
SOLD! Thanks BS, I probably would not have even looked at it.
At the rate you're buying cigars, you'll have to work another year
LOL.... We've got good news and bad news... You've reached retirement, but here's you credit card bill...!
-
LeBijou 1922 PR's on the mash today... 20/$76.29=catsrule w/Free ship
BOOM!
Oh damn.
SOLD! Thanks BS, I probably would not have even looked at it.
At the rate you're buying cigars, you'll have to work another year
LOL.... We've got good news and bad news... You've reached retirement, but here's you credit card bill...!
Obama will pay it for me.
-
Using a coping saw is a lost art, but I don't like to brag. ;D
What's a coping saw?
A saw that allows you to cope with even the worst of situations...
He's lost interest already.
Coped many a piece of trim when I remodeled the home.
Was I the only one who had to do a double-take on this sentence? I first read it as "copped many a piece of trim..." and figured I'd better start renovating my house double-quick.
You're probably the only one paying attention.
NO ONE GIVES A CHIT WHO'S PAYING ATTENTION!
All right, who the hell chit in Golfin' Dave's Wheaties this morning??
Honey Nut Cheerios ;)
Hey, I skipped breakfast...! Oh, but I did take a shit...
Thanks for saving me the cost of lunch, I was hungry before your post. :)
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
An external safety makes sense on a single-action semiauto pistol, or a semiauto with a hammer. On a striker-fired semiauto pistol, an external safety is window-dressing, akin to putting a safety on a double-action revolver.
-
GMornin fellas
Morning CG - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose. Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Yipped It Left Right?
We call it a 'pull hook' in the golf world
If you meant to do it, call it a draw... when you don't, snap hook.
Hey CG. How's about those BI-Zun! Not even close.
Just remember, it's Bi-Zon not Biceson
and Clem-Son, not Clem-Zen. (Clemp-Son is also acceptable for old schoolers)
Was one hell of a beatdown! GMornin Steve
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
Just like a Glock, yes but not a positive safety
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
-
Does not pay to lose at home, Texans fired 3 assistant coaches this morning.
Special Teams, Receivers and Defensive assistant.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
A total disaster for our state also, good luck to our new Governor who was sworn in this morning trying to fix our state budget.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Plus it don't pay to go look for some more.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
A total disaster for our state also, good luck to our new Governor who was sworn in this morning trying to fix our state budget.
Along with North Dakota, Ohio, West Virginia, Penn, Alaska, Oklahoma, Arkansas and to some degree Illinois, Indiana and Colorado.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Plus it don't pay to go look for some more.
13 rigs pulled off the jobs last week in TX alone.
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
An external safety makes sense on a single-action semiauto pistol, or a semiauto with a hammer. On a striker-fired semiauto pistol, an external safety is window-dressing, akin to putting a safety on a double-action revolver.
I'm really behind on this stuff.
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM (http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM)
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
An external safety makes sense on a single-action semiauto pistol, or a semiauto with a hammer. On a striker-fired semiauto pistol, an external safety is window-dressing, akin to putting a safety on a double-action revolver.
I'm really behind on this stuff.
You need to replace that flintlock of yours.
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
An external safety makes sense on a single-action semiauto pistol, or a semiauto with a hammer. On a striker-fired semiauto pistol, an external safety is window-dressing, akin to putting a safety on a double-action revolver.
I'm really behind on this stuff.
That would put you about 25 years behind. ;)
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM (http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM)
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
An external safety makes sense on a single-action semiauto pistol, or a semiauto with a hammer. On a striker-fired semiauto pistol, an external safety is window-dressing, akin to putting a safety on a double-action revolver.
I'm really behind on this stuff.
You need to replace that flintlock of yours.
Or 1911 ;D
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Plus it don't pay to go look for some more.
13 rigs pulled off the jobs last week in TX alone.
Falling like a rock now, Down $2.19 @ $30.97
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Plus it don't pay to go look for some more.
13 rigs pulled off the jobs last week in TX alone.
Falling like a rock now, Down $2.19 @ $30.97
you can look for more, and even find it, trick is to get the gubmint and eco-peeps to allow you to drill for it.
Oil/gas prices are like investments. market crashed back in the summer and I (just speaking from personal experience, a few people I spoke with concurred) lost about 5K in my retirement. market regained all and added to it and I re-gained around 3K. drop took 2 days, re-gain took 2 months. recent drop lost me approx 4k. took 2 days again. Would be questioning my investment group, but it seems they are not the only ones who are doing this.
Oil works the same. oil prices go up and price at the pump goes up immediately. oil prices go down, and it takes weeks for it to reflect.
fact of the matter is I hate them all! :P
-
@ Raz
http://www.cdnnsports.com/s-w-m-p40-compact.html#.VpPiXV9OKnM
While not my favorite supplier they are reputable, not sure but I think they charge you a 3% CC Fee but that is still the best deal I know of right now.
It said, "No thumb safety." Is there a safety on it..?
An external safety makes sense on a single-action semiauto pistol, or a semiauto with a hammer. On a striker-fired semiauto pistol, an external safety is window-dressing, akin to putting a safety on a double-action revolver.
I'm really behind on this stuff.
Modern double-action revolvers use some variation on the transfer-bar mechanism, which prevents the hammer from striking the primer on a cartridge unless the trigger is actually pulled through its full cycle. Striker-fired weapons work roughly the same way - you have to cycle the trigger fully for the mechanism to push the striker block out of the way to allow the striker to contact the primer on the cartridge.
Hammer-fired semiauto pistols have such a light trigger pull when cocked that an external safety is intended to prevent some small inadvertent movement of the trigger or dropping of the weapon from tripping the hammer and firing the pistol. Putting a transfer-type system on such pistols is possible, but it tends to make the action sloppy and heavy because of the need to move the hammer. So positive safeties and decocker systems are used instead.
But a striker pistol doesn't have to move all the mass of a hammer, so a smooth action and a manageable trigger pull can be built without the possibility of an unintended mechanical event firing the weapon.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Plus it don't pay to go look for some more.
13 rigs pulled off the jobs last week in TX alone.
Falling like a rock now, Down $2.19 @ $30.97
you can look for more, and even find it, trick is to get the gubmint and eco-peeps to allow you to drill for it.
Oil/gas prices are like investments. market crashed back in the summer and I (just speaking from personal experience, a few people I spoke with concurred) lost about 5K in my retirement. market regained all and added to it and I re-gained around 3K. drop took 2 days, re-gain took 2 months. recent drop lost me approx 4k. took 2 days again. Would be questioning my investment group, but it seems they are not the only ones who are doing this.
Oil works the same. oil prices go up and price at the pump goes up immediately. oil prices go down, and it takes weeks for it to reflect.
fact of the matter is I hate them all! :P
Yeah!
-
I've got gas!
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Plus it don't pay to go look for some more.
13 rigs pulled off the jobs last week in TX alone.
Falling like a rock now, Down $2.19 @ $30.97
you can look for more, and even find it, trick is to get the gubmint and eco-peeps to allow you to drill for it.
Oil/gas prices are like investments. market crashed back in the summer and I (just speaking from personal experience, a few people I spoke with concurred) lost about 5K in my retirement. market regained all and added to it and I re-gained around 3K. drop took 2 days, re-gain took 2 months. recent drop lost me approx 4k. took 2 days again. Would be questioning my investment group, but it seems they are not the only ones who are doing this.
Oil works the same. oil prices go up and price at the pump goes up immediately. oil prices go down, and it takes weeks for it to reflect.
fact of the matter is I hate them all! :P
I agree with your last sentence other than Oil pays a lots of bills around my house, even buys me some cigars for birthdays and fathers days so I hate them all but one! :)
But while they both go up and down and sometimes way up and way down oil is otherwise quite different. Oil has to be found and produced which is a lengthy process and when prices do like this they quit finding and seriously cut back on producing which is a major undertaking, it is called "shutting in" and is time consuming and very costly in itself so or short term downsides they keep on drilling and producing but for long term or extreme downsides they start shutting in existing wells, stopping drilling on new wells and stop looking and leasing for future wells. Below $30 for very long and all that will occur which means when the low supply begins to take over it goes ape shit crazy up again because it takes a long time to bring everything back on line.
Older conventional oil costs about $25-30/barrel to produce, newer conventional oil more like $35-45 and Shale oil is more along the lines of $65 to $75. Deep sea oil is more like $80-90 to produce. So do the math and see what happens at under $30 for very long, either the supply goes down and the price goes up quick or the companies go broke which is what OPEC is counting on but they might be the first to go broke as they are having to borrow in the bond markets now.
-
I've got gas!
Well it is worth about $2.45/mcf so sell it even though it cost far more than that to produce.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
Minus healthcare, it's all legit here. ;)
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
So the sooner you recognize it for what it is, roll up your sleeves, put your mudders, accept it and plow forward, the better off you'll be.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
Minus healthcare, it's all legit here. ;)
Of course, Obama fixed that...well except for the VA...
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
Minus healthcare, it's all legit here. ;)
Bam!
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
Minus healthcare, it's all legit here. ;)
that doesn't include Big Pharma, right? 8)
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
+1
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
So the sooner you recognize it for what it is, roll up your sleeves, put your mudders, accept it and plow forward, the better off you'll be.
LOL, did THAT 30 some years ago. but doesn't mean I have to like it or those that perpetrate it.
-
Time to call it. Hazzuh!
-
Time to call it. Hazzuh!
Glad I was here to witness it. Later, LTG. See ya on Wednesday.
-
Time to call it. Hazzuh!
take care Dave.
-
Time to call it. Hazzuh!
take care Dave of the golfing variety, enjoy the rest of your day!
-
Time to call it. Hazzuh!
Huzzah!
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Oh yeah we are together on that issue, but no different than any other publicly held company whether they make money or not! Truthfully a lot of the problem is also the "traders" that fuk with the prices up and down all the time. Worse than just wall street because these traders are all over the world.
-
Later Dave
Howdy CB
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
So the sooner you recognize it for what it is, roll up your sleeves, put your mudders, accept it and plow forward, the better off you'll be.
LOL, did THAT 30 some years ago. but doesn't mean I have to like it or those that perpetrate it.
True for sure.
You also don't have to just bend over and take it, you can make intelligent decisions to manage the situations as best as possible.
-
I don't want to seem negative but the price of oil is nearing a disaster level! $31.30/barrel down $1.86 today and the lowest price since 2003.
Sounds great for filling up your gas tank but there is a limit how low gas can go regardless of the price of oil because refining costs are so high these days.
Which is why OPEC is willing to loose money and drive the prices down to punish the upstart US market.
When I was a kid, it was called a gas war. It drove the gas down to an affordable price, and the American Public loved it. When I filled up the other day, a woman bought $2 worth of gas, and a guy bought $1.76. I'm sure they are hoping that gas goes back up to $145 a barrel.
Those gas wars were retailers playing games not oil drillers and producers, had virtually nothing to do with the price of oil.
when I grouse about the way oil pricing is handled, it's not at the workers, producers or gas station owners. it's the leaders of the major companies that make all of the money and screw all of us to do it. the same people screwing their own workers I might add and taking home millions of dollars in "bonuses" while complaining that they can't make any money in the industry.
Think you could pretty much plug any industry in there and come up with the same observation.
So the sooner you recognize it for what it is, roll up your sleeves, put your mudders, accept it and plow forward, the better off you'll be.
LOL, did THAT 30 some years ago. but doesn't mean I have to like it or those that perpetrate it.
True for sure.
You also don't have to just bend over and take it, you can make intelligent decisions to manage the situations as best as possible.
well, I usually refer back to the Who line in The Punk Meets the Godfather. whole line is to long for here but is relevant, last part of it goes '...breathe the air we have blown you'. We do what you said before, roll up our sleeves and put on our mudders.
-
I finally tried that Aging Room Small Batch M356 Rondo, aged 7 weeks without its wrapper, last night. It was relaxing, as I always enjoy, but it mostly just tasted like aged tobacco very slightly on the strong side. One dimensional without any added flavors. It went out twice, and needed a couple of minor corrections. Over all, I'd rate it, "I'd take one if some one gave it to me, but I'm not going to buy any." Any other thoughts out there..?
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
-
I finally tried that Aging Room Small Batch M356 Rondo, aged 7 weeks without its wrapper, last night. It was relaxing, as I always enjoy, but it mostly just tasted like aged tobacco very slightly on the strong side. One dimensional without any added flavors. It went out twice, and needed a couple of minor corrections. Over all, I'd rate it, "I'd take one if some one gave it to me, but I'm not going to buy any." Any other thoughts out there..?
That sounds about right. What do you mean you smoked it without the wrapper though? Are you referring to the cellophane?
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
If you were at Best Buy, he was a dick. lol
Although, with the pending Ultra HD on it's way, Blueray is probably the safer option since standard DVD's will soon be obsolete. You can still play standard definition on Blueray, and most will up-convert them.
-
I finally tried that Aging Room Small Batch M356 Rondo, aged 7 weeks without its wrapper, last night. It was relaxing, as I always enjoy, but it mostly just tasted like aged tobacco very slightly on the strong side. One dimensional without any added flavors. It went out twice, and needed a couple of minor corrections. Over all, I'd rate it, "I'd take one if some one gave it to me, but I'm not going to buy any." Any other thoughts out there..?
Many of the Aging Room receive very favorable reviews by "the biz" including people who I generally agree with. I thought them very ordinary with no particularly interesting features and below average construction and burn. Just as with the Stogie Guys article for today, different tastes!
http://www.stogieguys.com/2016/01/01112016-commentary-checking-the-year-end-cigar-lists.html
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
If you were at Best Buy, he was a dick. lol
Although, with the pending Ultra HD on it's way, Blueray is probably the safer option since standard DVD's will soon be obsolete. You can still play standard definition on Blueray, and most will up-convert them.
+1 on the Dick if at Best Buy
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
They are all DVD's. There are subformats/variants like Blu-Ray, 3D, Ultraviolet etc. Blu-Ray presents a higher resolution than regular DVDs and generally costs a few dollars more. Being as you never got around to getting the new TV, Blu-Ray difference would not be perceptible to you.
Just like going to the movie theater and choosing between regular, 3D, Imax, RealD, 3D Imax HD and whatever.
-
Tonight's supper: Meat & Potatoes.
-
I finally tried that Aging Room Small Batch M356 Rondo, aged 7 weeks without its wrapper, last night. It was relaxing, as I always enjoy, but it mostly just tasted like aged tobacco very slightly on the strong side. One dimensional without any added flavors. It went out twice, and needed a couple of minor corrections. Over all, I'd rate it, "I'd take one if some one gave it to me, but I'm not going to buy any." Any other thoughts out there..?
That sounds about right. What do you mean you smoked it without the wrapper though? Are you referring to the cellophane?
Yes, I removed the cellophane before placing it into the humidor for 7 weeks of aging. It was the 5 Vegas Gold that I had to scotch tape the outer Connecticut wrapper back on before smoking it.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
They are all DVD's. There are subformats/variants like Blu-Ray, 3D, Ultraviolet etc. Blu-Ray presents a higher resolution than regular DVDs and generally costs a few dollars more. Being as you never got around to getting the new TV, Blu-Ray difference would not be perceptible to you.
Just like going to the movie theater and choosing between regular, 3D, Imax, RealD, 3D Imax HD and whatever.
Along with that, I'd like to meet the individuals who also gave us dvdr + and dvdr- and made THEM differenf for some reason, along with blu ray and death ray and ray ray.... sheesh.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Actually, the salesman was pretty nice. He seemed honestly to have not understood the term. He also smelled very nice, but I figured I'd keep that to myself. After I left I could still smell him for the remainder of the day. I guess I must have been standing too close...?
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Try and find a DVD player in a store anymore. Blu-Ray players will play DVD's, so actual DVD players are going extinct. But yeah, the employee was either a dick, clueless, or both.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Actually, the salesman was pretty nice. He seemed honestly to have not understood the term. He also smelled very nice, but I figured I'd keep that to myself. After I left I could still smell him for the remainder of the day. I guess I must have been standing too close...?
You're making me uncomfortable.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Actually, the salesman was pretty nice. He seemed honestly to have not understood the term. He also smelled very nice, but I figured I'd keep that to myself. After I left I could still smell him for the remainder of the day. I guess I must have been standing too close...?
You're making me uncomfortable.
You don't smell too good?
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Actually, the salesman was pretty nice. He seemed honestly to have not understood the term. He also smelled very nice, but I figured I'd keep that to myself. After I left I could still smell him for the remainder of the day. I guess I must have been standing too close...?
You're making me uncomfortable.
You don't smell too good?
Don't know. But I sure as hell don't want Dad smelling me.
-
I finally tried that Aging Room Small Batch M356 Rondo, aged 7 weeks without its wrapper, last night. It was relaxing, as I always enjoy, but it mostly just tasted like aged tobacco very slightly on the strong side. One dimensional without any added flavors. It went out twice, and needed a couple of minor corrections. Over all, I'd rate it, "I'd take one if some one gave it to me, but I'm not going to buy any." Any other thoughts out there..?
Many of the Aging Room receive very favorable reviews by "the biz" including people who I generally agree with. I thought them very ordinary with no particularly interesting features and below average construction and burn. Just as with the Stogie Guys article for today, different tastes!
http://www.stogieguys.com/2016/01/01112016-commentary-checking-the-year-end-cigar-lists.html
It sounds like we all agree on this one. Thank god I was able to agree on at least one cigar.. ;)
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
-
Tonight's supper: Meat & Potatoes.
LMAO! Go Bad Dad!
-
Think I will go home, probably no cigar today it is a bit cool out for my smoking preferences. Later all.
-
Think I will go home, probably no cigar today it is a bit cool out for my smoking preferences. Later all.
Later TR.
-
got my 2nd box of BV's. I had one on Saturday and it smoked ok as well. No big change in the flavor profile in a week but not unpleasant. still a bit mild for my tastes, but will probably make a good morning smoke. Very bland on light up, but it does pick up some when you get about 3/4" into it.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Actually, the salesman was pretty nice. He seemed honestly to have not understood the term. He also smelled very nice, but I figured I'd keep that to myself. After I left I could still smell him for the remainder of the day. I guess I must have been standing too close...?
You're making me uncomfortable.
I went to my friends party, and there was about 30 or 40 people there. I had to use the bathroom, and I noticed a bottle of Polo sitting there. I thought to myself, "No one will notice," so I splashed some on. I'm not sure if any of you have smelled Polo before, but you can smell this stuff a mile away. I walked back into the crowded room, and everyone turned and looked at me, and they all damn well knew what I had done... So if you go to a party and see Polo sitting on the counter, "Don't do it...!"
-
Tonight's supper: Meat & Potatoes.
LMAO! Go Bad Dad!
Everyone bitches at me if they watch me cook, but they sure like it. Let's see, a 1/2 shot of whiskey, 1/2 a glass of wine, a little brown sugar, some Greek seasoning... Actually, it's really good, and I can't wait to eat.
-
Think I will go home, probably no cigar today it is a bit cool out for my smoking preferences. Later all.
Later TR.
+1
-
got my 2nd box of BV's. I had one on Saturday and it smoked ok as well. No big change in the flavor profile in a week but not unpleasant. still a bit mild for my tastes, but will probably make a good morning smoke. Very bland on light up, but it does pick up some when you get about 3/4" into it.
Which one was the BV...? Was that the bargain buy..?
-
Think I will go home, probably no cigar today it is a bit cool out for my smoking preferences. Later all.
Wimp!
-
Think I will go home, probably no cigar today it is a bit cool out for my smoking preferences. Later all.
Wimp!
See, that's why you need anti-wife candles....!!! All I need to do is light a candle and my wife is happy as hell...
-
I received a coupon from Honda today for $100 off a remote car starter. I called them and the normal price was $675, but with the coupon it would be $575. That seems sort of high, but I'd love to have one.
-
got my 2nd box of BV's. I had one on Saturday and it smoked ok as well. No big change in the flavor profile in a week but not unpleasant. still a bit mild for my tastes, but will probably make a good morning smoke. Very bland on light up, but it does pick up some when you get about 3/4" into it.
Which one was the BV...? Was that the bargain buy..?
Buena Vista from Cigar Page. it was a bargain buy i think. needs some time to be sure.
-
Think I will go home, probably no cigar today it is a bit cool out for my smoking preferences. Later all.
Wimp!
See, that's why you need anti-wife candles....!!!
Just splash on some Polo. She'll run for the hills.
-
Alright, headed home. LHC Core for the ride. y'all be good...and if you can't be good, be careful!
-
I received a coupon from Honda today for $100 off a remote car starter. I called them and the normal price was $675, but with the coupon it would be $575. That seems sort of high, but I'd love to have one.
Well is it worth $600 loving to have it? With as good as your wife is with lights and windshield wipers, aren't you afraid of what she would do with that?
-
Alright, headed home. LHC Core for the ride. y'all be good...and if you can't be good, be careful!
Well past the age for worrying about either. But thanks for the thought.
-
I received a coupon from Honda today for $100 off a remote car starter. I called them and the normal price was $675, but with the coupon it would be $575. That seems sort of high, but I'd love to have one.
Get into a warmed up car.
-
Alright, headed home. LHC Core for the ride. y'all be good...and if you can't be good, be careful!
Hi/bye Sammeh!
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
You don't turn blu-ray on or off. It's the reader internal to the device that when you use a blu-ray DVD it gives you greater clarity in your picture. (Blue laser vs red). You might mean Bluetooth?
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
They are all DVD's. There are subformats/variants like Blu-Ray, 3D, Ultraviolet etc. Blu-Ray presents a higher resolution than regular DVDs and generally costs a few dollars more. Being as you never got around to getting the new TV, Blu-Ray difference would not be perceptible to you.
Just like going to the movie theater and choosing between regular, 3D, Imax, RealD, 3D Imax HD and whatever.
Along with that, I'd like to meet the individuals who also gave us dvdr + and dvdr- and made THEM differenf for some reason, along with blu ray and death ray and ray ray.... sheesh.
Ya doesn't have to call him Johnson. You can call him Jay. Or you can call him Ray. Or you can call him Ray Ray or Ray Jay...
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Actually, the salesman was pretty nice. He seemed honestly to have not understood the term. He also smelled very nice, but I figured I'd keep that to myself. After I left I could still smell him for the remainder of the day. I guess I must have been standing too close...?
You're making me uncomfortable.
I went to my friends party, and there was about 30 or 40 people there. I had to use the bathroom, and I noticed a bottle of Polo sitting there. I thought to myself, "No one will notice," so I splashed some on. I'm not sure if any of you have smelled Polo before, but you can smell this stuff a mile away. I walked back into the crowded room, and everyone turned and looked at me, and they all damn well knew what I had done... So if you go to a party and see Polo sitting on the counter, "Don't do it...!"
Yea, I always go with the Brut.
-
I received a coupon from Honda today for $100 off a remote car starter. I called them and the normal price was $675, but with the coupon it would be $575. That seems sort of high, but I'd love to have one.
Well is it worth $600 loving to have it? With as good as your wife is with lights and windshield wipers, aren't you afraid of what she would do with that?
I was thinking about that too. She came home and said the heater is broke. At 8 degrees this morning, she started her car for 1 min., then drove it home 3/4 of a mile, and said it's not heating up.... She fricking crazy... Thank god for the other crazy things she does..!! }:)
-
Time to eat... bbl.
-
Time to eat... bbl.
Meat and taters!
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
You don't turn blu-ray on or off. It's the reader internal to the device that when you use a blu-ray DVD it gives you greater clarity in your picture. (Blue laser vs red). You might mean Bluetooth?
I think he meant on and off as in cycling the power.
-
Afternoon Raz.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
You don't turn blu-ray on or off. It's the reader internal to the device that when you use a blu-ray DVD it gives you greater clarity in your picture. (Blue laser vs red). You might mean Bluetooth?
I think he meant on and off as in cycling the power.
Then we have bigger problems! ;)
-
Afternoon Raz.
Hiya, Mikey.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
You don't turn blu-ray on or off. It's the reader internal to the device that when you use a blu-ray DVD it gives you greater clarity in your picture. (Blue laser vs red). You might mean Bluetooth?
I think he meant on and off as in cycling the power.
Then we have bigger problems! ;)
...but we knew that.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
You don't turn blu-ray on or off. It's the reader internal to the device that when you use a blu-ray DVD it gives you greater clarity in your picture. (Blue laser vs red). You might mean Bluetooth?
I think he meant on and off as in cycling the power.
Correct
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
You don't turn blu-ray on or off. It's the reader internal to the device that when you use a blu-ray DVD it gives you greater clarity in your picture. (Blue laser vs red). You might mean Bluetooth?
I think he meant on and off as in cycling the power.
Then we have bigger problems! ;)
Unplugged it a while back, no problem at all.
-
I went to Best Buy the other day to buy a new DVD player. I went into the tv department where I was approached by a young salesman. He asked me if he could help me and I replied, "I would like to buy a new DVD player." He said, "What...?" Again I said, "I would like to buy a new DVD player." He looked at me and shook his head and said, "I'm sorry, but I don't know what you are talking about..?" I said, "I think I'm saying it right, it's a DVD player. You put little DVD movies into it, and you can watch movies on your tv.." He said, "Oh....., you want a Blue Ray Player...!"
It's really starting to get weird. The older I get the faster my words are become obsolete, and causing me a big communications problem.
I think the next time this happens to me, I'm going to say, "Aaaaaa, the new word for DVD player is Blue Ray. What do they call Pussy..?"
That's weird. As far as I know, they're still called DVDs. Blu-ray is a bit different. I suspect your salesperson was a dick.
Me too. I asked for a simple straight forward small sized DVD Player for Christmas to watch my old b&w tv show dvd's on and Warden picked me up a sony one somewhere but it was just wha ti needed. Play, FF, Back-Up and stop with a simple remote, hdmi slot and only an inch or so thick and about a foot wide at most.
I got a Sony too (BDP-S6500) for $99.99. Since I've still not purchased a new tv as I said I was going to do last year at this time, I made sure it had all the features. Wi-Fi wireless streaming, 4k upgrading, and 3D. I think it will convert a 2D to a 3D..? I hooked it up to Netflix on the tv in the bedroom (HD), and it was very impressive. Now I'm going to have to watch that program on Netflix that everyone has been pissed off about, "Making a Murder." As for as the new tv, that's an unknown.
Mine is a Sony, cost $29 at Walmart she said, has no bells and whistles and does everything I need which is play my shows when I push the button.. I got some kind of fancy smancy blu ray on another tv that I can't even figure out how to turn on and off. Warden and the boy use to use it but chit she can barely turn the tv on and off so it just sits collects dust.
You don't turn blu-ray on or off. It's the reader internal to the device that when you use a blu-ray DVD it gives you greater clarity in your picture. (Blue laser vs red). You might mean Bluetooth?
I think he meant on and off as in cycling the power.
Then we have bigger problems! ;)
...but we knew that.
True but they are not related to DVD's or on/off
-
Afternoon Football Fans
-
$1.4 Billion Jackpot Now!!!!
-
$1.4 Billion Jackpot Now!!!!
Apparently in Spain the lottery is up to €2.4B.
-
$1.4 Billion Jackpot Now!!!!
Money, Money, Money, Money, Money!
-
$1.4 Billion Jackpot Now!!!!
Money, Money, Money, Money, Money!
Easy Money!
-
$1.4 Billion Jackpot Now!!!!
Apparently in Spain the lottery is up to €2.4B.
:oWhere do we buy tickets :)
-
$1.4 Billion Jackpot Now!!!!
Apparently in Spain the lottery is up to €2.4B.
:oWhere do we buy tickets :)
That was according to Kelly and Michael this morning. But I just checked it out and it looks like it's a once in a year lottery that they start selling in July and the drawing is December 22nd. I believe the figure I gave you was for all the prizes combined. You can purchase the tickets online through http://www.elgordo.com/shop/play_elgordo.asp.
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
This post was bothering me so I decided it had to be addressed. WTF? Is it really late for taking down Christmas decorations? I thought I was early this year. I'm usually doing it in March.
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
This post was bothering me so I decided it had to be addressed. WTF? Is it really late for taking down Christmas decorations? I thought I was early this year. I'm usually doing it in March.
Where I came from they were to be down by the day after New Years. the last ones I saw still up here were taken down this weekend so you are ok now I think but March? That is way to late down here but may be the norm up there with more winter.
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
This post was bothering me so I decided it had to be addressed. WTF? Is it really late for taking down Christmas decorations? I thought I was early this year. I'm usually doing it in March.
Where I came from they were to be down by the day after New Years. the last ones I saw still up here were taken down this weekend so you are ok now I think but March? That is way to late down here but may be the norm up there with more winter.
Sure get your money's worth out of those decorations.
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
-
SHEESH!
-
Football Lull
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
I got up at 4:00 this morning and got to do it all over again tomorrow.
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
I got up at 4:00 this morning and got to do it all over again tomorrow.
A couple of double espresso's in the morning and you'll be just fine.
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
I got up at 4:00 this morning and got to do it all over again tomorrow.
A couple of double espresso's in the morning and you'll be just fine.
5 hour energy drink maybe?
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
This post was bothering me so I decided it had to be addressed. WTF? Is it really late for taking down Christmas decorations? I thought I was early this year. I'm usually doing it in March.
id like them on till the end of February. They make winter tolerable
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
I got up at 4:00 this morning and got to do it all over again tomorrow.
A couple of double espresso's in the morning and you'll be just fine.
5 hour energy drink maybe?
Red Bull give you wings!
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
This post was bothering me so I decided it had to be addressed. WTF? Is it really late for taking down Christmas decorations? I thought I was early this year. I'm usually doing it in March.
id like them on till the end of February. They make winter tolerable
Some sparkle to brighten up those cold, grey winter nights.
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
I got up at 4:00 this morning and got to do it all over again tomorrow.
A couple of double espresso's in the morning and you'll be just fine.
5 hour energy drink maybe?
or do like me, and don't even watch the game. Gopher fans pack up the season in late November
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
I got up at 4:00 this morning and got to do it all over again tomorrow.
A couple of double espresso's in the morning and you'll be just fine.
5 hour energy drink maybe?
Red Bull give you wings!
And probably a Fuk'n heart attack
-
Decided to start my chores with bringing in the Christmas lights... While smoking a yard gar.
Better late than never. What are you smoking?
This post was bothering me so I decided it had to be addressed. WTF? Is it really late for taking down Christmas decorations? I thought I was early this year. I'm usually doing it in March.
id like them on till the end of February. They make winter tolerable
Some sparkle to brighten up those cold, grey winter nights.
indeed, I like them.
-
Evening OY
-
Evening OY
aloha
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
You should teach that dog not to bite you, he does not try bite to me anymore, does not even bark.
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
You should teach that dog not to bite you, he does not bite me anymore.
i may need to go to Minneapolis this Sunday for a cigar. So fucking cold, I can't enjoy a smoke in a garage. Stogies on Grand has great chairs and big ass tv's
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
You should teach that dog not to bite you, he does not bite me anymore.
i may need to go to Minneapolis this Sunday for a cigar. So fucking cold, I can't enjoy a smoke in a garage. Stogies on Grand has great chairs and big ass tv's
Sounds like a good idea to me, I know it is a cold MF'r up there.
You get your cast off yet?
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
You should teach that dog not to bite you, he does not bite me anymore.
i may need to go to Minneapolis this Sunday for a cigar. So fucking cold, I can't enjoy a smoke in a garage. Stogies on Grand has great chairs and big ass tv's
Sounds like a good idea to me, I know it is a cold MF'r up there.
You get your cast off yet?
no, it's been 4 weeks and they wanted 6 weeks till I get new X-rays. I can workout a bit more and I feel the shoveling I did today to dig my daughters car out of the snow bank.
-
It should be illegal to play a ballgame of national interest in the Pacific Time Zone, sheesh I will be lucky to see halftime.
Sorry Raz :)
A couple of double espresso's and you'll be just fine.
I got up at 4:00 this morning and got to do it all over again tomorrow.
A couple of double espresso's in the morning and you'll be just fine.
5 hour energy drink maybe?
Red Bull give you wings!
And probably a Fuk'n heart attack
That too.
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
You should teach that dog not to bite you, he does not bite me anymore.
i may need to go to Minneapolis this Sunday for a cigar. So fucking cold, I can't enjoy a smoke in a garage. Stogies on Grand has great chairs and big ass tv's
Sounds like a good idea to me, I know it is a cold MF'r up there.
You get your cast off yet?
no, it's been 4 weeks and they wanted 6 weeks till I get new X-rays. I can workout a bit more and I feel the shoveling I did today to dig my daughters car out of the snow bank.
Shoveling with a cast on, now that is a trick!
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
You should teach that dog not to bite you, he does not bite me anymore.
i may need to go to Minneapolis this Sunday for a cigar. So fucking cold, I can't enjoy a smoke in a garage. Stogies on Grand has great chairs and big ass tv's
Sounds like a good idea to me, I know it is a cold MF'r up there.
You get your cast off yet?
no, it's been 4 weeks and they wanted 6 weeks till I get new X-rays. I can workout a bit more and I feel the shoveling I did today to dig my daughters car out of the snow bank.
Shoveling with a cast on, now that is a trick!
Damn!
-
Evening OY
aloha
.....oh yea, I best not talk to you or a lurking dog will bite me.
You should teach that dog not to bite you, he does not bite me anymore.
i may need to go to Minneapolis this Sunday for a cigar. So fucking cold, I can't enjoy a smoke in a garage. Stogies on Grand has great chairs and big ass tv's
Sounds like a good idea to me, I know it is a cold MF'r up there.
You get your cast off yet?
no, it's been 4 weeks and they wanted 6 weeks till I get new X-rays. I can workout a bit more and I feel the shoveling I did today to dig my daughters car out of the snow bank.
Shoveling with a cast on, now that is a trick!
Damn!
cant have cigar to took a Valium and chillaxin. 😄