CigarBanter

Cigar Banter => Daily Cigar Deals Discussion => Topic started by: CigarBanter on October 25, 2017, 04:07:25 AM

Title: 10/25/2017
Post by: CigarBanter on October 25, 2017, 04:07:25 AM
Any hump day deals on the various internet sites that are worth talking about? Join in this discussion and perhaps learn something along the way. Warning: don't proceed if you have thin skin but don't be afraid to post either... And welcome aboard!
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 04:50:59 AM
Morning Humps, Humpers, Humpees and the Humped!
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 04:51:46 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 04:53:37 AM
For those that fell asleep long before the WS game was over:

Dodgers won 3-1 to lead the series 1-0. :(
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 05:05:27 AM
The Hoot Owl is doing some serious hoot'n this morning, first time I have heard him in a few weeks.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 05:07:45 AM
Turds at CI, LGC at the Sister and a Mash with mostly inflated prices but there are a few scattered ok deals on there.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 05:11:02 AM
Morning Humps, Humpers, Humpees and the Humped!
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 05:53:26 AM
Good morning, SCDave.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 06:05:13 AM
Good morning, SCDave.
Morning Mayor T
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 06:07:20 AM
Clear and 53 degrees this morning, sunny and only up to 68 this afternoon.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 06:31:40 AM
Clear and 53 degrees this morning, sunny and only up to 68 this afternoon.
I think it's colder there than here. Let's see...

It's 59° going to 69° but it feels a heck of a lot warmer than that. Maybe because of the humidity.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 06:48:12 AM
Morning CarolinaDave and TeachersPetTony.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 06:51:10 AM
Morning CarolinaDave and TeachersPetTony.
Morning Dave
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 06:52:01 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 06:52:57 AM
Today is Wednesday, Oct. 25, the 298th day of 2017. There are 67 days left in the year.

Today's Highlight in History:

On Oct. 25, 1854, the "Charge of the Light Brigade" took place during the Crimean War as an English brigade of more than 600 men charged the Russian army, suffering heavy losses.

On this date:

In 1415, during the Hundred Years' War, outnumbered English soldiers led by Henry V defeated French troops in the Battle of Agincourt in northern France.

In 1760, Britain's King George III succeeded his late grandfather, George II.

In 1929, former Interior Secretary Albert B. Fall was convicted in Washington, D.C. of accepting a $100,000 bribe from oil tycoon Edward L. Doheny. (Fall was sentenced to a year in prison and fined $100,000; he ended up serving nine months.)

In 1939, the play "The Time of Your Life," by William Saroyan, opened in New York.

In 1945, Taiwan became independent of Japanese colonial rule.

In 1954, a meeting of President Dwight D. Eisenhower's Cabinet was carried live on radio and television; to date, it's the only presidential Cabinet meeting to be broadcast.

In 1957, mob boss Albert Anastasia of "Murder Inc." notoriety was shot to death by masked gunmen in a barber shop inside the Park Sheraton Hotel in New York.

In 1962, during a meeting of the U.N. Security Council, U.S. Ambassador Adlai E. Stevenson II demanded that Soviet Ambassador Valerian Zorin confirm or deny the existence of Soviet-built missile bases in Cuba; Stevenson then presented photographic evidence of the bases to the Council.

In 1971, the U.N. General Assembly voted to admit mainland China and expel Taiwan.

In 1983, a U.S.-led force invaded Grenada at the order of President Ronald Reagan, who said the action was needed to protect U.S. citizens there.

In 1994, Susan Smith of Union, South Carolina, claimed that a black carjacker had driven off with her two young sons (Smith later confessed to drowning the children in John D. Long Lake, and was convicted of murder). Three defendants were convicted in South Africa of murdering American exchange student Amy Biehl.

In 2002, U.S. Sen. Paul Wellstone, D-Minn., was killed in a plane crash in northern Minnesota along with his wife, daughter and five others, a week and a-half before the election. Actor Richard Harris died in London at age 72.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 06:53:30 AM
Ten years ago: President George W. Bush visited Southern California, telling residents weary from five days of wildfires: "We're not going to forget you in Washington, D.C." The Boston Red Sox beat the Colorado Rockies 2-1 at Fenway to take a 2-0 World Series lead.

Five years ago: President Barack Obama, seeking to shore up support among women, intensified his pressure on Mitt Romney to break any ties with a Republican Senate candidate, Richard Mourdock of Indiana, who said that if a woman became pregnant from rape it was "something God intended." Romney ignored the emotional social issue, holding to an optimistic campaign tone as he fought for victory in crucial Ohio.

One year ago: A federal judge in San Francisco approved a nearly $15 billion settlement, giving nearly a half-million Volkswagen owners and leaseholders the choice between selling their diesel engine cars back or having them repaired so they didn't cheat on emissions tests and spew excess pollution. Four people were killed in a river rapids ride accident at a popular theme park in Queensland, Australia. The Cleveland Indians beat the Chicago Cubs 6-0 in the World Series opener.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 06:54:01 AM
Today's Birthdays: Former American League president Dr. Bobby Brown is 93. Actress Marion Ross is 89. Basketball Hall of Famer Bob Knight is 77. Pop singer Helen Reddy is 76. Author Anne Tyler is 76. Rock singer Jon Anderson (Yes) is 73. Political strategist James Carville is 73. Singer Taffy Danoff (Starland Vocal Band) is 73. Rock musician Glenn Tipton (Judas Priest) is 70. Actor Brian Kerwin is 68. Actor Mark L. Taylor is 67. Movie director Julian Schnabel is 66. Rock musician Matthias Jabs is 61. Actress Nancy Cartwright (TV: "The Simpsons") is 60. Country singer Mark Miller (Sawyer Brown) is 59. Rock musician Chad Smith (Red Hot Chili Peppers; Chickenfoot) is 56. Actress Tracy Nelson is 54. Actor Michael Boatman is 53. Actor Kevin Michael Richardson is 53. Actor Mathieu Amalric is 52. Singer Speech is 49. Actress-comedian-TV host Samantha Bee is 48. Actor Adam Goldberg is 47. Actor-singer Adam Pascal is 47. Rock musician Ed Robertson (Barenaked Ladies) is 47. Actress Persia White is 47. Country singer Chely (SHEL'-ee) Wright is 47. Violinist Midori is 46. Actor Craig Robinson is 46. Actor Michael Weston is 44. Actor Zachary Knighton is 39. Actress Mariana Klaveno is 38. Actor Mehcad (muh-KAD') Brooks is 37. Actor Ben Gould is 37. Actor Josh Henderson is 36. Rhythm-and-blues singer Young Rome is 36. Pop singer Katy Perry is 33. Rock singer Austin Winkler is 33. Singer Ciara is 32. Actress Krista Marie Yu (TV: "Dr. Ken") is 29. Actress Conchita Campbell is 22.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 06:54:30 AM
Thought for Today: "Bureaucracy, the rule of no one, has become the modern form of despotism." - Mary McCarthy, author and critic (born 1912, died this date in 1989).
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 06:57:28 AM
Morning CarolinaDave and TeachersPetTony.
Good morning, NJDave.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 06:58:58 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
Title: Re: 10/25/2017
Post by: sfish on October 25, 2017, 07:03:14 AM
Good morning boys, hump day and it feels like it
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 07:18:37 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
Flip probably confused him, and for that matter Flip might still be sitting there wondering where everybody is.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 07:18:53 AM
Good morning boys, hump day and it feels like it
Morning Fish
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 07:22:13 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
Flip probably confused him, and for that matter Flip might still be sitting there wondering where everybody is.
Real possibility there....he's probably waiting outside....
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 07:22:51 AM
Morning BlueLineFish.
Title: Re: 10/25/2017
Post by: sfish on October 25, 2017, 07:23:08 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
I thought it was last night too
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 07:28:18 AM
That's one way to jumpstart a car...

http://wspa.com/2017/10/24/cam-catches-lightning-striking-car-in-greer/
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 07:45:19 AM
Well that corrupt douchebag mayor of my little town in TX at least got his hand slapped with a way too small $500 fine by the state election commission for posting online voting recommendations using fake names.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 07:47:56 AM
That's one way to jumpstart a car...

http://wspa.com/2017/10/24/cam-catches-lightning-striking-car-in-greer/
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 08:00:08 AM
Good morning guys. It's golf day and I'm going to give it a try.
54° and clear. WTF this is Florida!
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 08:05:14 AM
Good morning guys. It's golf day and I'm going to give it a try.
54° and clear. WTF this is Florida!
Morning Dean
Title: Re: 10/25/2017
Post by: Threebean on October 25, 2017, 08:09:30 AM
Morning Daves, Dean, Fish, and Mr. Mayor.  43 deg here, a bit nippy on the ride in, but I ain't complaining.  Will be a very pleasant 80 deg later.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 08:16:43 AM
Morning Daves, Dean, Fish, and Mr. Mayor.  43 deg here, a bit nippy on the ride in, but I ain't complaining.  Will be a very pleasant 80 deg later.
Morning Bean
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 08:20:56 AM
Good morning guys. It's golf day and I'm going to give it a try.
54° and clear. WTF this is Florida!
Morning Dean
Has nothing to do with insanity. My body has hurt too much to play but today I'm not feeling too bad.
Title: Re: 10/25/2017
Post by: Threebean on October 25, 2017, 08:33:21 AM
That's one way to jumpstart a car...

http://wspa.com/2017/10/24/cam-catches-lightning-striking-car-in-greer/
And the article provides no clue as to the condition of the car afterward.  Lazy reporting. 
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 08:34:44 AM
Good morning boys, hump day and it feels like it
No joke.

Good morning, Scott.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 08:46:37 AM
Morning Daves, Dean, Fish, and Mr. Mayor.  43 deg here, a bit nippy on the ride in, but I ain't complaining.  Will be a very pleasant 80 deg later.
At least it isn't wet.  Morning Mr. Bean.
Title: Re: 10/25/2017
Post by: sfish on October 25, 2017, 09:09:20 AM
Do we know what happened to LTG?
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 09:33:48 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
Flip probably confused him, and for that matter Flip might still be sitting there wondering where everybody is.
Real possibility there....he's probably waiting outside....
That would suck. I hope not.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 09:34:38 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
I thought it was last night too
Obviously, I wasn't very clear. Now I really feel horrible.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 09:40:50 AM
Good morning guys. It's golf day and I'm going to give it a try.
54° and clear. WTF this is Florida!
Make sure you put on some sunscreen.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 09:41:28 AM
Morning Daves, Dean, Fish, and Mr. Mayor.  43 deg here, a bit nippy on the ride in, but I ain't complaining.  Will be a very pleasant 80 deg later.
Good morning, Mark.
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 09:45:27 AM
http://highlandhillsgolfcc.com
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 09:47:03 AM
Good morning guys. It's golf day and I'm going to give it a try.
54° and clear. WTF this is Florida!
Make sure you put on some sunscreen.
No need.  He's cultivating his Florida Senior leather skin.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 09:49:53 AM
Do we know what happened to LTG?
He got bored.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 09:51:21 AM
Special today from SBC


Warped/Cloud Wednesday Special!
Today only we have a Warped/Cloud Hopper Wednesday special! You have two options to pick from! Please be mindful of the codes. Also don't forget you get 5% based in reward points for any purchases.


CODE: SBCW= 20% off Warped/Edition One Category (no minimum)

CODE: SBCW150 = 20% off Warped/Edition One Category plus three Cloud Hopper No. 88 and three Cloud Hopper No. 53 when you spend $150+
Title: Re: 10/25/2017
Post by: sfish on October 25, 2017, 10:16:04 AM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 10:30:38 AM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
Title: Re: 10/25/2017
Post by: Threebean on October 25, 2017, 11:14:00 AM
Facebook lull. 
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 11:26:40 AM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I now have a FB acct.
Title: Re: 10/25/2017
Post by: sfish on October 25, 2017, 11:32:16 AM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I now have a FB acct.
Sell-Out!!
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 11:34:51 AM
Morning, muchachos. Senga yee?
Title: Re: 10/25/2017
Post by: flip from jersey on October 25, 2017, 11:36:04 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
I had rabbit and roasted potatoes, followed by a snickers bar....
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 11:37:35 AM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I now have a FB acct.
Sell-Out!!
I joined the Cigar Cartel.
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 11:38:50 AM
mobile cigar lounge on way for an Attiude Adjustment before golf.
Title: Re: 10/25/2017
Post by: flip from jersey on October 25, 2017, 11:39:19 AM
Bean had a late and lonely bantering night.

Thanks for the Internet info.
Did a nice wrap-up though...

Looks like I'm PW'ing here.  SCDave is in bed, the NJ boys are at Jaime's, Dean is with a redhead and discovering that the carpet does not match the drapes, UNTony is on a conference call with Senegal or some other hand-out country, NJDave is planning his reemergence as SCDave2, Oy is smoking another Cuban and waiting for the first snowflake to appear, Fish is planning his third vacation this quarter, Short Stack is wrestling with an obstinate boiler, CB is doing curls with a purse, flip is eating who knows what, Ogie is fresh out of free ship codes, and LTG is watching the Browns stink up the place again.
Except that we weren't at Jamie's. That's supposed to be tomorrow night. Sheesh.
Flip probably confused him, and for that matter Flip might still be sitting there wondering where everybody is.
Real possibility there....he's probably waiting outside....
I've learned my lesson, I no longer stand out in the cold, in front of closed places....
Title: Re: 10/25/2017
Post by: flip from jersey on October 25, 2017, 11:45:01 AM
Do we know what happened to LTG?
he was out in Tennessee, last week, with the wife & kids, lots of
pics on Facebook.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 11:46:55 AM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I now have a FB acct.
Sell-Out!!
Seriously. They ain't gonna give you redheads.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 11:50:33 AM
mobile cigar lounge on way for an Attiude Adjustment before golf.
Is that a La Aurora corojo?
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 11:57:42 AM
mobile cigar lounge on way for an Attiude Adjustment before golf.
Is that a La Aurora corojo?
connie.
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 11:58:42 AM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I now have a FB acct.
Sell-Out!!
Seriously. They ain't gonna give you redheads.
they don't banter like we do.
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 12:01:23 PM
Sheesh, sales of new homes jumps to a 10-year high, and the market drops. Go figure.
Title: Re: 10/25/2017
Post by: tcarblu on October 25, 2017, 12:15:34 PM
Good afternoon all. Just a quick drive-by. Happy Birthday to Jon Anderson, lead singer of Yes, who is my all time favorite. Have been following them since 1968.
Title: Re: 10/25/2017
Post by: flip from jersey on October 25, 2017, 12:23:32 PM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I now have a FB acct.
Sell-Out!!
I joined the Cigar Cartel.
check out CigarBook group on FB

Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 01:00:39 PM
mobile cigar lounge on way for an Attiude Adjustment before golf.
Is that a La Aurora corojo?
connie.
I had the corojo recently and really enjoyed it.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 01:02:47 PM
Good afternoon all. Just a quick drive-by. Happy Birthday to Jon Anderson, lead singer of Yes, who is my all time favorite. Have been following them since 1968.
And you've been in a roundabout enter since...
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 02:01:03 PM
Sheesh.
Title: Re: 10/25/2017
Post by: sfish on October 25, 2017, 02:17:33 PM
mobile cigar lounge on way for an Attiude Adjustment before golf.
Is that a La Aurora corojo?
Give the redhead her glasses back
Title: Re: 10/25/2017
Post by: Threebean on October 25, 2017, 02:18:36 PM
mobile cigar lounge on way for an Attiude Adjustment before golf.
Is that a La Aurora corojo?
Give the redhead her glasses back
CNS
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 02:29:36 PM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I thought with the new improvements that this site was going to put Z out of business... :P
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 02:32:12 PM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I now have a FB acct.
Sell-Out!!
Seriously. They ain't gonna give you redheads.
they don't banter like we do.
That may be part of the reason.... ???
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 02:32:49 PM
Heading to the airport early tomorrow, 8:15 flight out.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 02:41:47 PM
Do we know what happened to LTG?
He got bored.
Seriously? That's why he's not around?
We lost another one to Facebook.

DAMN YOU,  MARK ZUCKERBERG!!!
I thought with the new improvements that this site was going to put Z out of business...
I guess the redhead icons weren't enough. Back to the drawing board.
Title: Re: 10/25/2017
Post by: Threebean on October 25, 2017, 02:41:54 PM
Heading to the airport early tomorrow, 8:15 flight out.
Stop teasing...to where and what is your connection time?
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 03:02:25 PM
Antoine Domino Jr. AKA Fats Domino has died at 89.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 03:03:12 PM
Heading to the airport early tomorrow, 8:15 flight out.
Stop teasing...to where and what is your connection time?
Going down to Clemson for the Georgia Tech game and visit with the boy.
I don't do no stinkin' connections.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 03:10:42 PM
Antoine Domino Jr. AKA Fats Domino has died at 89.
RIP
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 03:59:38 PM
Antoine Domino Jr. AKA Fats Domino has died at 89.
RIP
Second RIP
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 04:00:08 PM
601 Red lit
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 04:08:57 PM
 :o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 04:16:56 PM
The market is a redheaded stepchild lull.
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 04:18:19 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 04:22:45 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 04:28:51 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 04:29:31 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 04:33:56 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 04:47:24 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Title: Re: 10/25/2017
Post by: A Friend of Charlie on October 25, 2017, 05:13:18 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 05:18:40 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
They're bringing back the Christmas Wishbook.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 05:29:25 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
My brother said the reason for dropping those appliance lines is they owe them so much money they were going to have to submit full payment with their orders.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 05:30:16 PM
WS Game 2 tonight on Fox Local channel at 8:09 ET
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 05:31:11 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
They're bringing back the Christmas Wishbook.
They are toast, might as well bring back the buggy whips.
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 05:40:04 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
They're bringing back the Christmas Wishbook.
They are toast, might as well bring back the buggy whips.
I dunno. It might stave off death for a little while, albeit they'll be greatly diminished. Guess we'll see.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 05:42:32 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
They're bringing back the Christmas Wishbook.
They are toast, might as well bring back the buggy whips.
I dunno. It might stave off death for a little while, albeit they'll be greatly diminished. Guess we'll see.
They will last until there is no more money for the execs to steal.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 05:59:19 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Dead on analogy.  The Sears catalog to the rural US was everything.  You could even buy houses, cars and livestock through it.
Title: Re: 10/25/2017
Post by: Travellin Dave on October 25, 2017, 06:01:08 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
They're bringing back the Christmas Wishbook.
They are toast, might as well bring back the buggy whips.
Don't give Dean any ideas...
Title: Re: 10/25/2017
Post by: razgueado on October 25, 2017, 06:07:35 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Dead on analogy.  The Sears catalog to the rural US was everything.  You could even buy houses, cars and livestock through it.
Back when Amazon got started, my dad asked me how the company was going to survive selling booms without making any money. I explained what their strategy was, and said that they weren't going to stay with books, that eventually they'd try to become the Sears-Roebuck of the 21st century. 

What I missed is that they'd try to also become the NCR of the 21st century.

Still, I wish I'd had money to buy stock back then.
Title: Re: 10/25/2017
Post by: South Carolina Redfish on October 25, 2017, 06:12:46 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
They're bringing back the Christmas Wishbook.
They are toast, might as well bring back the buggy whips.
Don't give Dean any ideas...
I swear the same thought crossed my mind when writing that, in fact I almost changed it to wagon wheels.
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 08:56:14 PM
back from golf and dinner at the redheads. no boating until it warms up. we had a little fire going by the water but was still cold so we lit her little fireplace and got cozy.
Title: Re: 10/25/2017
Post by: FloridaDean on October 25, 2017, 09:28:58 PM
:o :o :o

While not much else there is worth a crap I have always been satisfied with the quality of Sears Craftsman Hand Tools (not power tools). And today I needed some wire cutters and some wire strippers so went to the Sears store very close to the new place.

Holy Chit Shirley, all of their hand tools I looked at are now MADE IN CHINA, FMTT's.   I looked around and they had some old style screwdriver sets for 1/2 price, damned if they were not MADE IN USA.  Bought a couple of nice sets because the boy can always USE & LOSE Tools.  Checking out and commented to the old guy at the cash register and he said yeah, they have been marking down the old Made in USA stuff.  No USA wire cutters left though.
Sears has been in deep schitt for a long time.
Well yeah, I am surprised they have managed to stay open this long but switching to Chinese made tools is sure not going to help.  Fuk'n Chinese stuff is the same price too, told the guy if I wanted Chinese tools I would just go to Harbor Freight and save 90%.

Tools are one of the only things people even buy there anymore
Just announced that Sears will no longer be selling Whirlpool, Kitchen-Aid or Maytag appliances.  (although Whirlpool will continue to make some Kenmore appliances)
The business relationship was over 100 years old.
Funny, warden was looking at new appliances when we were there and the top level Kenmore refrigerators are made by LG.

Sears remaining days are pretty numbered.
They missed the internet bigger than anyone else. Even Microsoft. They were too invested in their brick-and-mortar presence...which is cosmically funny, given their origins. They were the Amazon of the 19th century.
Maybe they'll go back to catalogue.
They're bringing back the Christmas Wishbook.
They are toast, might as well bring back the buggy whips.
Don't give Dean any ideas...
I swear the same thought crossed my mind when writing that, in fact I almost changed it to wagon wheels.

I'm not into whips, but thanks for thinking of me.