CigarBanter

Advanced search  
Pages: 1 ... 9 10 [11] 12 13 ... 26

Author Topic: 1/11/2016  (Read 37732 times)

CigarGuy87

  • Non-Founding Member
  • Esteemed Status
  • *****
  • Posts: 11706
  • The tundra is thawing
Re: 1/11/2016
« Reply #150 on: January 11, 2016, 09:23:37 AM »

I thought it pretty strange that 4 of 4 home field advantage teams all lost.
Completely agree - I went 4/4 on my picks and I honestly thought I could have picked all 4 incorrect before the games started. 
Logged

sfish

  • Guest
Re: 1/11/2016
« Reply #151 on: January 11, 2016, 09:23:41 AM »

Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish.  And the wife still has to pick out some mirrors.  And two medicine cabinets.  And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work.  We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets.  I have no idea if they were available with the crown molding pre-installed.  Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
Logged

LuvTooGolf

  • Founding Member
  • Banter Elder
  • *****
  • Posts: 44711
  • Believeland!
Re: 1/11/2016
« Reply #152 on: January 11, 2016, 09:25:48 AM »

GMornin fellas
Morning CG  - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose.  Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
Logged

South Carolina Redfish

  • Coffee At Sunrise 🌄 and Cocktails At Sunset 🌅
  • Founding Member
  • Post Whore Extraordinaire
  • *****
  • Posts: 55869
  • “Retirement Is Wonderful”
Re: 1/11/2016
« Reply #153 on: January 11, 2016, 09:28:10 AM »

Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish.  And the wife still has to pick out some mirrors.  And two medicine cabinets.  And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work.  We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets.  I have no idea if they were available with the crown molding pre-installed.  Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seems at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
I think it is called shop built/site hung custom cabinetry.
Logged

ss2

  • Founding Member
  • Senior Status
  • ****
  • Posts: 4039
  • Summertime!!
Re: 1/11/2016
« Reply #154 on: January 11, 2016, 09:28:11 AM »

mornin' folks.
Logged

sfish

  • Guest
Re: 1/11/2016
« Reply #155 on: January 11, 2016, 09:28:26 AM »

Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish.  And the wife still has to pick out some mirrors.  And two medicine cabinets.  And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work.  We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets.  I have no idea if they were available with the crown molding pre-installed.  Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seams at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
EDIT:

Eff you Tony for making me write this out...Rookies, sheesh
Logged

South Carolina Redfish

  • Coffee At Sunrise 🌄 and Cocktails At Sunset 🌅
  • Founding Member
  • Post Whore Extraordinaire
  • *****
  • Posts: 55869
  • “Retirement Is Wonderful”
Re: 1/11/2016
« Reply #156 on: January 11, 2016, 09:29:11 AM »

GMornin fellas
Morning CG  - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose.  Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The hands could have been related to the weather, IMHO.
Logged

sfish

  • Guest
Re: 1/11/2016
« Reply #157 on: January 11, 2016, 09:29:34 AM »

Good morning, men.
Morning Uncle Tone.
How's the bathroom coming, Mark? Getting ready to finish a basement here. Just completely clearing it out for now. Eventually, the bathroom will be built.
A couple of towel bars (on order) and f'n crown molding left to finish.  And the wife still has to pick out some mirrors.  And two medicine cabinets.  And, and, and......
I hear ya. I've done quite a bit of crown molding work. It's a pain in the ass. The secret is building a good jig so that you cut each piece at the same angle. I have two saws for that. Not sure where either of them are but I suspect I will find them this week.
I cheat and cut it at work.  We have a miter saw table setup which works well. So it's not the cutting part as much as the installing part which sucks. These are cabinets, not wall/ceiling molding.
Well, that and checking for the this side up arrows....
The warden ordered the cabinets.  I have no idea if they were available with the crown molding pre-installed.  Sorta doubt it, but that would have been the ticket for sure.
No such thing, how would you hang multiples? Rookies, sheesh
Where's logic come into it?
If you are hanging a run of cabinets, or just more than one, how are the cabinets going to butt to each other if crown goes around 3 sides. If crown is only on the fronts, there are seems at every cabinet and how would you return the side to the wall at the end of a run when the fronts are cut square at the end of the cabinet?
I think it is called shop built/site hung custom cabinetry.
Bottom line is that there's no way to cheat these things, learn it or hire a professional
Logged

South Carolina Redfish

  • Coffee At Sunrise 🌄 and Cocktails At Sunset 🌅
  • Founding Member
  • Post Whore Extraordinaire
  • *****
  • Posts: 55869
  • “Retirement Is Wonderful”
Re: 1/11/2016
« Reply #158 on: January 11, 2016, 09:29:34 AM »

Logged

sfish

  • Guest
Re: 1/11/2016
« Reply #159 on: January 11, 2016, 09:30:53 AM »

GMornin fellas
Morning CG  - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose.  Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Logged

South Carolina Redfish

  • Coffee At Sunrise 🌄 and Cocktails At Sunset 🌅
  • Founding Member
  • Post Whore Extraordinaire
  • *****
  • Posts: 55869
  • “Retirement Is Wonderful”
Re: 1/11/2016
« Reply #160 on: January 11, 2016, 09:33:14 AM »

Either my normally very reliable watch just died or the one year old 3 year warranty battery quit one of the two.  Always Something!
Logged

CigarGuy87

  • Non-Founding Member
  • Esteemed Status
  • *****
  • Posts: 11706
  • The tundra is thawing
Re: 1/11/2016
« Reply #161 on: January 11, 2016, 09:33:25 AM »

GMornin fellas
Morning CG  - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose.  Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
Agrees, he's a good punter too - and it sucks cause he was wearing gloves...can't believe he couldn't tough it out for 60seconds and get a proper hold.
Logged

South Carolina Redfish

  • Coffee At Sunrise 🌄 and Cocktails At Sunset 🌅
  • Founding Member
  • Post Whore Extraordinaire
  • *****
  • Posts: 55869
  • “Retirement Is Wonderful”
Re: 1/11/2016
« Reply #162 on: January 11, 2016, 09:33:48 AM »

GMornin fellas
Morning CG  - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose.  Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Yipped It Left Right?
Logged

Travellin Dave

  • Fanatical Member
  • Post Whore Extraordinaire
  • *****
  • Posts: 72012
  • Resolutions intact
    • My Top Cigars of 2021
Re: 1/11/2016
« Reply #163 on: January 11, 2016, 09:35:44 AM »

I thought it pretty strange that 4 of 4 home field advantage teams all lost.
And all three of the 5-7 teams invited to college bowls won.
Year of the underdog for sure, go Tigers!
Logged

LuvTooGolf

  • Founding Member
  • Banter Elder
  • *****
  • Posts: 44711
  • Believeland!
Re: 1/11/2016
« Reply #164 on: January 11, 2016, 09:36:00 AM »

GMornin fellas
Morning CG  - How bout that NDS - 5 in a row!
Indeed, glad to see you beat your Gamecocks as well.
Hopefully the big orange can get it done tonight!!!
Sure hope so.
They've got my vote!
I'll refrain from cheering for them, for Dave's sake. If the Bengals and Vikings are any indication, me rooting for a team leads to a painful demise.
No shit right - those Vikings...words can't describe that heartbreak.
#lacesoutdan
Both teams found very Browns ways to lose, no question.
Truth to that - just a bad way to lose.  Didn't score a touchdown all day, hard to blame a kicker who goes 3/4 in sub zero temps all day, but that's the 'life of a kicker'.
And those poor bastiges are usually near the bottom of the pay scale too.
He won them a couple of games this year too, so I hope he is still with the team next year.
The damn holder should be canned. He botched the hold in 3 of the 4 kicks. The kicker was lucky he made anything all day, when you add the shitty holds to the shitty weather.
The kicker shit the bed, nerves got the best of him on that kick. He hurried it and yanked the kick, plain and simple.
Not sure nerves could put that much side spin on it. That was an epic duck hook.
Logged
Pages: 1 ... 9 10 [11] 12 13 ... 26