Print

[bluecollar]

got all my planned chores done yesterday. just waiting for the garbageman to show to make sure he hauls away my old grill. new one is out for delivery so if and when it arrives I know it'll need assembly. ribs tomorrow if successful.

Gotta love a new grill. Finally got one this year after running the last one through its paces for 14 years.

I think I got almost 4 unprotected from the element years out of it. it was just a small 2 burner. new one is a small 3 burner with grill cover. if it gets here.

Old one was a 3 burner, but had to go up to 4 burners this time. I always joked I either needed a bigger grill or a smaller family. Went with the bigger grill, cheaper that way. ;)Sounds like Fishmath to me.

Does anyone remember the fishes? Both gmrfish and sfish?

yep. Greg stayed at my place one year with Rick and WhoTheFuckIsButch for golf, cigars, and grilling.
Scott on the other hand is only forgotten until he makes his quarterly post.

Yeah that was a great time. Dean I wish I had the photos from that day. I will have to look back some.

[bluecollar]

Morning Rick, Dave, Dean, Tony and Oy

Hey Dave did you get that fresh 4 mega sampler before it was gone?

Yea, but it's still available isn't it?  Shows available on the page.

It doesn't have the buy now. No way to put in cart. Luckily mine will be here tomorrow

[LuvTooGolf]

damn it:

Duke Energy: The estimated time for power to be on is currently 02:00PM on Jul 21 for; outage caused by object in contact with line. Approx 1969 customers impacted.

D'oh!

[bluecollar]

Wish me luck. Gonna try tackling an HVAC issue myself. I believe it's more plumbing related but I have to try before bringing in the professionals.

If you need anything I can help walk you through give me a shout.

[LuvTooGolf]

got all my planned chores done yesterday. just waiting for the garbageman to show to make sure he hauls away my old grill. new one is out for delivery so if and when it arrives I know it'll need assembly. ribs tomorrow if successful.

Gotta love a new grill. Finally got one this year after running the last one through its paces for 14 years.

I think I got almost 4 unprotected from the element years out of it. it was just a small 2 burner. new one is a small 3 burner with grill cover. if it gets here.

Old one was a 3 burner, but had to go up to 4 burners this time. I always joked I either needed a bigger grill or a smaller family. Went with the bigger grill, cheaper that way. ;)Sounds like Fishmath to me.

Does anyone remember the fishes? Both gmrfish and sfish?

yep. Greg stayed at my place one year with Rick and WhoTheFuckIsButch for golf, cigars, and grilling.
Scott on the other hand is only forgotten until he makes his quarterly post.

I'm friends with Greg on FB, so we interact often. Scotty I don't hear much from. I think he's still smarting because he couldn't hang out with Nate and me for CF this year.

[Travellin Dave]

Dean's favorite place, The Villages, no longer spared from COVID.

https://www.villages-news.com/2020/07/13/deadly-covid-19-virus-continues-to-hammer-the-villages-and-nearby-communities/

[A Friend of Charlie]

Wish me luck. Gonna try tackling an HVAC issue myself. I believe it's more plumbing related but I have to try before bringing in the professionals.

If you need anything I can help walk you through give me a shout.

Much appreciated. What time can you be here?

I'm guessing I created this mess. Went too long between changing filter and now there appears to be a clog in the condensation line. Opened one end and attempting to snake it but it seems to get stuck after 6 1/2'  where the PVC takes a 90° turn. The air has been turned off for about 8 hours and the open end is dripping water steadily into a bucket for now.

[LuvTooGolf]

Dean's favorite place, The Villages, no longer spared from COVID.

https://www.villages-news.com/2020/07/13/deadly-covid-19-virus-continues-to-hammer-the-villages-and-nearby-communities/

That seems like a place where the virus could just tear through like wildfire.

[bluecollar]

Wish me luck. Gonna try tackling an HVAC issue myself. I believe it's more plumbing related but I have to try before bringing in the professionals.

If you need anything I can help walk you through give me a shout.

Much appreciated. What time can you be here?

I'm guessing I created this mess. Went too long between changing filter and now there appears to be a clog in the condensation line. Opened one end and attempting to snake it but it seems to get stuck after 6 1/2'  where the PVC takes a 90° turn. The air has been turned off for about 8 hours and the open end is dripping water steadily into a bucket for now.

Sounds like you may have some sludge forming in the condensate line. You could from the highest point try some bleach and warm water to open some of the restriction.

[FloridaDean]

Dean's favorite place, The Villages, no longer spared from COVID.

https://www.villages-news.com/2020/07/13/deadly-covid-19-virus-continues-to-hammer-the-villages-and-nearby-communities/

yep, too friendly.

[A Friend of Charlie]

Wish me luck. Gonna try tackling an HVAC issue myself. I believe it's more plumbing related but I have to try before bringing in the professionals.

If you need anything I can help walk you through give me a shout.

Much appreciated. What time can you be here?

I'm guessing I created this mess. Went too long between changing filter and now there appears to be a clog in the condensation line. Opened one end and attempting to snake it but it seems to get stuck after 6 1/2'  where the PVC takes a 90° turn. The air has been turned off for about 8 hours and the open end is dripping water steadily into a bucket for now.

Sounds like you may have some sludge forming in the condensate line. You could from the highest point try some bleach and warm water to open some of the restriction.

I may try that next. Trying to snake now from the trap. I'll keep you posted.

[A Friend of Charlie]

#Plumbingbanter.com

[LuvTooGolf]

#Plumbingbanter.com

Not our worst version.

[A Friend of Charlie]

#Plumbingbanter.com

Not our worst version.

Can't believe how many right angles this condensation line has in it. Can't easily get the snake through it. Kinda blows.

[bluecollar]

Wish me luck. Gonna try tackling an HVAC issue myself. I believe it's more plumbing related but I have to try before bringing in the professionals.

If you need anything I can help walk you through give me a shout.

Much appreciated. What time can you be here?

I'm guessing I created this mess. Went too long between changing filter and now there appears to be a clog in the condensation line. Opened one end and attempting to snake it but it seems to get stuck after 6 1/2'  where the PVC takes a 90° turn. The air has been turned off for about 8 hours and the open end is dripping water steadily into a bucket for now.

Sounds like you may have some sludge forming in the condensate line. You could from the highest point try some bleach and warm water to open some of the restriction.

I may try that next. Trying to snake now from the trap. I'll keep you posted.

A plugged filter can cause a frozen evaporator. Your unit may be slightly under charge. A complete thaw would be necessary. It's tough to diagnose w o seeing it. Just trying to be helpful